15 day DEI Course (3 week course) = £2500 inc vat
Domestic Electrical Installer Certificate
This 15 day domestic electrical installer course (DEI) runs over 3 consecutive weeks and is the ideal starting point if you want to become a domestic electrical installer, are working in a related trade or would like to understand more about the electrics in your own home. The course is a mix of practical and theory and you will leave us with a comprehensive understanding of domestic electrical installations. We have some large electrical training bays here at YTA so we can really get stuck in and understand how a domestic electrical installation works!
The skills and qualifications gained on this course will enable you to carry out domestic electrical work as an electrician from a as little as replacing a socket or light fitting, adding a socket or light fitting even up to a full house rewire but any alterations to circuits would need to be inspected and tested by an electrician who is a member of the competent persons scheme. To be a member of the competent persons scheme you must hold your DEI, Safe Isolation and the 18th Edition qualifications plus have electrical experience (2 years).
What qualifications are included in the 15 day DEI course:
- Domestic Electrical Installer certificate
- Safe Isolation certificate
The domestic electrical installer certificate is an industry recognised qualification that will expire after 5 years.
DEI (Domestic Electrical Installer Certificate) is suitable for operatives who carry out electrical work as a secondary task i.e. heating installers, bathroom and kitchen fitter’s, plumbers, builders and domestic appliance fitters / installers.
If your Logic Certification Defined or Full Scope Part P certificate has, or is about to expire, it is recommended that as part of your Continuous Professional Development (CPD) you attend this course. The DEI course covers all areas that have been updated or changed since the introduction of the BS7671:2018 the 18th Edition Wiring Regulations.
Be trained and assessed in the following areas:
- Component exchange
- Applicable building regulations
- Electrical safety legislation regulations, standards and terminology
- Pre-work survey / inspections
- Safe isolation procedures
- Identification of unsafe electrical situations
- Earthing and bonding requirements
- Electrical test procedures
- Cable components and fitting selection
- Installation and replacement of electrical components and fittings
- Checking the correct and safe operation of installed electrical components
- Recording of electrical test results, completion of certification and notification requirements
- Installing and or re-routing cables to form suitable outlet connections
- Special locations
- High protective conductors
- Domestic lighting circuits, SELV
- Maintaining domestic electrical installations
- 3 Phase supplies
The Domestic Electrical Installer covers electrical work as outlined in the Building Regulation and complies with BS7671:2018.
This course is designed for persons working within the electrical or related industries it is not designed to take a non-qualified / non-related person and make them into electricians.
NB: From the 6th April 2013 the qualification entry requirements for companies or businesses wishing to join a Part P Competent Person Scheme (CPS) changed. The relevant change is for the designated qualifying supervisor (QS). In a larger organisation, the QS will be responsible for the competence and work of all installers carrying out electrical installations. Sole traders are both the QS and installer. The QS must hold as minimum the Level 3 Certificate in Installing, Testing and Ensuring Compliance of Electrical Installation Work in Dwellings. For larger businesses, the DEI qualification can still be used for operatives who are under the direction of the qualifying supervisor. Sole traders must comply with the qualification entry requirement detailed above. The awarding body is LOGIC Certification
Assessment is carried out using a variety of methods; including multiple choice, short written response and scenario questions and observed practical tasks.
The total cost for the 15 day Domestic Electrical Installer course is £2500 including vat.
YTA is the UK’s premier training centre for construction training and assessment backed up by outstanding independent customer reviews on www.reveiws.co.uk (5 out of 5!)
|Our 15 day DEI Course is currently unavailable until further notice.||FULL|
To book please phone the YTA Team
YTA TRAINING AND ASSESSMENT
Unit 12a Factory Street, Dudley Hill, Bradford, BD4 9NW, West Yorkshire.
Or for more information please fill in the below enquiry form.
Courses are held every week Monday to Friday.
All Course Times are: 09.00am – 16.00pm