Another great 5 star carpentry NVQ l2 review has been left following the completion of the site carpentry NVQ EWPA (Experienced Worker Practical Assessment).
The EWPA is a NVQ assessment route enabling an experienced worker to achieve their NVQ level 2 in their relevant trade through a practical assessment. By using your skills acquired over the years to complete a task in our NVQ Centre (usually 1 day) which is then assessed. This qualification is the one required to attain the blue skilled worker CSCS card and gain construction site work.
David Clarke – YTA Carpentry NVQ review
The EWPA NVQ assessor will evaluate your skills through professional discussion, witness testimonies and the practical assessment (as shown below in the two photos)
Units that make up the Site Carpentry NVQ Level 2
QCF641: Conform to general workplace safety
QCF642: Conform to efficient work practices
QCF643: Move and handle resources
Supported by THREE optional units to choose from:
QCF09: Install first fixing components
QCF10: Install second fixing components
QCF11: Erect structural carcassing components
QCF12: Maintain non-structural carpentry work
QCF628: Setting up and using transportable cutting and shaping machines in the workplace
Are you an experienced Carpenter / Joiner of 5 or more years? then you can spend 1 day at our CITB / NOCN Cskills approved NVQ Centre in Yorkshire completing the wood occupations site carpentry NVQ level 2 EWPA (Experienced Worker Practical Assessment). We run this assessment on Saturday’s 7:30am until approx 4pm depending on your time. We run the assessment at your training centre in Bradford, West Yorkshire.
The NVQ EWPA is a route enabling an experienced worker to achieve their NVQ level 2 in their relevant trade through practical assessment. This is a fast track nvq assessment route for experienced tradespersons.
By using your skills acquired over the years to complete a task in our CITB NVQ Centre (approximately 1 day but 2 days if needed) which is then assessed it is possible to achieve the required NVQ level 2 needed to gain access to site work.
We can do this entire NVQ carpentry assessment in 1 day if you are prepared to arrive at YTA for 7:30am until finish (approx 4pm).
TOTAL COST = £900 (£750 + VAT)
*****(£450 deposit gets the assessment booked. Then, £450 on the day of the assessment)*****
Once the deposit is paid we can get you registered so you can work on site with a temporary red CSCS card)
All EWPA Times are: 07.30am – Approx. 16.00pm
NVQ EWPA’s are held every week including weekends.
Tel: 01274682199