YTA Training

Trade

By

Plumbing Course – Video Review by Darren Clarke

We have had our first plumbing course video review! Darren Clarke, a gas fitter from Liverpool attended our 10 day plumbing level 1 plumbing course and here is his mid-course review after completing the first 5 days.

Whats Covered on the plumbing course:

The first 5 days will see you working with copper pipe and fixings, plumbing in a bathroom, a small 3 radiator system including thermostatic radiator valves, understanding different heating systems, plumbing in a kitchen sink including waste pipes plus plenty of fault finding and repair work throughout the week.

Darrens 10 day level 1 plumbing course was cut short due to COVID-19 but he will be returning for the second week (advanced plumbing course) at a later date.

Plumbing course video review below:

Subscribe to the YTA YouTube channel and look out for more reviews in the coming weeks.

Darrens review of YTA:

Darren also left a review (below) on reviews.co.uk, a trusted review site.

Darren Clarke plumbing course review
Darren Clarke plumbing course review

Just finished 5 day of my 10 day plumbing course being a gas fitter not a plumber this course helped me massively learnt so much looking forward to the next 5 days met some great lads Graham is a top guy with plenty knowledge GREAT PLACE GREAT PEOPLE good place to learn or to get you back in to doing your own property work will be back to do my 5 days as soon as this situation calms down and will be back to do Electrician course may thanks guys

Thank you for such a great review Darren, we are looking forward to having you back with us to complete the 10 day level 1 plumbing course once we can re-open following COVID-19.

The YTA team.

More reviews for YTA can be found at www.reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

We are open for business

We are open for business and our courses are still running every week. Our training centre is a large 6500 sq foot, high ceiling well ventilated area with individual training bays AND tools per person. We have latex gloves and masks to wear if required along with hand-wash and cleaning wipes and we only teach small class numbers on average 5 per class.

All hands-on practical training out in the centre learning. Here’s a selection of photos taken this week and last week from the plumbing, tiling, carpentry and plastering courses.

If on the Government advice, businesses like ours are asked to close, we can re-schedule courses for a later date. With a little help and goodwill we will all get through this, we’ll support you, we ask you support us.

We do have a policy if you cant attend due to coronavirus which can be found here. 

 

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary we are open for business Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

Email: info@ytatraining.com

YTA and our courses can be found at www.reviews.co.uk

YTA reviews

By

Book with confidence – COVID-19

Book a course with confidence – COVID-19

We are still open for business as usual but we are closely following advice from the government in keeping you safe.

If you book a course (pay a deposit / full payment) and are then unable to attend by the time your course start date comes around due to the coronavirus (COVID-19) then we will re-schedule your course for a later date in the year with no loss of your deposit/full payment..

These coming weeks will be a very worrying time for all businesses country wide as general footfall may decrease and we hope you will support us through this time.

Here’s what we will do:

  • Re-schedule any course or courses if you are unable to attend due to coronavirus without losing your deposit or full payment.
  • We have antibacterial hand-wash to use as frequently as you like
  • Everyone works/trains in their own training bays and do not share hand tools
  • We have disposable latex gloves around the training centre for everyone to use
  • All equipment and tools are cleaned down with antibacterial wipes
  • We will keep the total number of students and staff within our 6500 sq ft construction training centre to below 25 people.

I hope the above will help you book a course with confidence and together we can take each day as it comes.

If you have coronavirus (COVID-19) symptoms, the NHS link is HERE.

 

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, BD4 9NW

Tel: 01274682199

By

Carpentry NVQ Level 2 review

Another great 5 star carpentry NVQ l2 review has been left following the completion of the site carpentry NVQ EWPA (Experienced Worker Practical Assessment).

The EWPA is a NVQ assessment route enabling an experienced worker to achieve their NVQ level 2 in their relevant trade through a practical assessment. By using your skills acquired over the years to complete a task in our NVQ Centre (usually 1 day) which is then assessed. This qualification is the one required to attain the blue skilled worker CSCS card and gain construction site work.

David Clarke – YTA Carpentry NVQ review

I gained my carpentry nvq here at the age of 46 You really want to get your certification from here they are very professional and have a easy atmosphere the tutors are very experienced give it ago

Carpentry NVQ level 2 review

The EWPA NVQ assessor will evaluate your skills through professional discussion, witness testimonies and the practical assessment (as shown below in the two photos)

Units that make up the Site Carpentry NVQ Level 2

QCF641: Conform to general workplace safety
QCF642: Conform to efficient work practices
QCF643: Move and handle resources

Supported by THREE optional units to choose from:

QCF09: Install first fixing components
QCF10: Install second fixing components
QCF11: Erect structural carcassing components
QCF12: Maintain non-structural carpentry work
QCF628: Setting up and using transportable cutting and shaping machines in the workplace

Carpentry NVQ level 2 assessment front
Carpentry NVQ level 2 assessment front
Carpentry NVQ level 2 assessment back
Carpentry NVQ level 2 assessment back

Are you an experienced Carpenter / Joiner of 5 or more years? then you can spend 1 day at our CITB / NOCN Cskills approved NVQ Centre in Yorkshire completing the wood occupations site carpentry NVQ level 2 EWPA (Experienced Worker Practical Assessment). We run this assessment on Saturday’s 7:30am until approx 4pm depending on your time. We run the assessment at your training centre in Bradford, West Yorkshire.

The NVQ EWPA is a route enabling an experienced worker to achieve their NVQ level 2 in their relevant trade through practical assessment. This is a fast track nvq assessment route for experienced tradespersons.

By using your skills acquired over the years to complete a task in our CITB NVQ Centre (approximately 1 day but 2 days if needed) which is then assessed it is possible to achieve the required NVQ level 2 needed to gain access to site work.

We can do this entire NVQ carpentry assessment in 1 day if you are prepared to arrive at YTA for 7:30am until finish (approx 4pm).

TOTAL COST = £900 (£750 + VAT)

*****(£450 deposit gets the assessment booked. Then, £450 on the day of the assessment)*****

Once the deposit is paid we can get you registered so you can work on site with a temporary red CSCS card)

All EWPA Times are: 07.30am – Approx. 16.00pm

NVQ EWPA’s are held every week including weekends.

Tel: 01274682199

By

Great YTA Kitchen Fitting Course Review

Another great review once again following the completion of a YTA Training and Assessment 5 day kitchen fitting course.

Craig MacGarvie – 5 Star Kitchen Fitting Course Review

I recently undertook a kitchen fitting course with Lawrence Booth. The course was excellent and I learned a lot. Lawrence was also a great teacher and talked me through each step. I will be back to do the plumbing course at some point! Thanks again.

 

Thank you Craig for the fantastic review following the 5 day course. Lawrence is a fantastic teacher who loves to share his extensive knowledge on kitchen fitting, carpentry & joinery. We look forward to seeing you back with us at YTA for the plumbing course Craig.

On the 5 day intensive kitchen fitting course you will learn how to design a kitchen to the room provided and what types of cupboards and units are available to suit a variety of designs to suit a customers specification. Base units will need to be levelled on a and planned to a design along with hanging the wall units and fitting the extractor hood. You will use professional kitchen fitting tools form jig saws, circular saws and routers. You will be shown every aspect of setting up each tool along with handy tips along the way on how to use the tools for different materials.

 

This review and more genuine YTA reviews can be found on reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

Excellent review following completion of multiple courses at YTA

Another excellent 5 star review has been left on Google reviews following the completion of multiple courses at YTA. Allan traveled down for several weeks from Scotland whilst completing a variety of construction courses at YTA Training And Assessment in Bradford, West Yorkshire

Allan spent 5 weeks training with YTA in 10 days Plastering, 10 days Wall and Floor Tiling and 5 days Plumbing. He also opted to ‘bolt on’ the Cskills level 1 certificate qualifications in the tiling and plastering courses along with the Ascentis level 1 Award in Plumbing. Following the completion of the courses Allan is now set up and working for himself and he has left us a lovely review.

Please ready below:

OUTSTANDING.. From the first phone call to enquire about the availability of courses till completion of 5 weeks of training. Graham the owner was extremely helpful and knowledgable enabling me to pick the correct courses suitable to my needs..I traveled from Scotland a 4 hour drive and stayed in the b&b recommended by Graham ( model farm) a 5 minute drive from the training centre… £150 for 5 nights with a huge choice of breakfast options that kept you going throughout the day… although there is similar training courses available in Scotland after careful research I am glad to say it was well worth the travelling to YTA for value for money, in-depth hands on training and the fantastic instructors at the various courses.. I completed 2 weeks Tiling 2 weeks plastering and 1 week plumbing all with the level 1 qualification. The instructors… Lyndon, thank you so much for your help and guidance through the plumbing course I really couldn’t of done it without your knowledge patience and basically general down to earth attitude really top top man…also picked up invaluable tips for Tiling from yourself aswell, thank you mate…Dave, again went above and beyond to help, I really enjoyed the plastering and am now out working for myself which I wouldn’t of been able to do without Daves expertise, learned so much in 2 weeks from Dave and have been back in touch with him seeking advice which Dave has duly given . If your looking at doing a plastering course look no further Dave will put you in the right direction…. Lawrence, although I didn’t actually have Lawrence as an instructor he was always there to give advice and guidance another top bloke.. Anyone looking for diy skills or as I was seeking, a complete change in occupation YTA is the place to go without doubt, well worth the travelling… Graham, Dave, Lyndon and Lawerence thank you….

Allan from Scotland YTA review

Thank you for the great review Allan, it was a pleasure having you with us for all those weeks and we are glad you enjoyed your time with us. Remember to keep in touch and let us know how you get on, if you are ever back down in Bradford be sure to pop in for a brew!

More reviews for YTA and our courses can be found at www.reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

Facebook