YTA Training

YTA

By

We are open for business

We are open for business and our courses are still running every week. Our training centre is a large 6500 sq foot, high ceiling well ventilated area with individual training bays AND tools per person. We have latex gloves and masks to wear if required along with hand-wash and cleaning wipes and we only teach small class numbers on average 5 per class.

All hands-on practical training out in the centre learning. Here’s a selection of photos taken this week and last week from the plumbing, tiling, carpentry and plastering courses.

If on the Government advice, businesses like ours are asked to close, we can re-schedule courses for a later date. With a little help and goodwill we will all get through this, we’ll support you, we ask you support us.

We do have a policy if you cant attend due to coronavirus which can be found here. 

 

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary we are open for business Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

Email: info@ytatraining.com

YTA and our courses can be found at www.reviews.co.uk

YTA reviews

By

Book with confidence – COVID-19

Book a course with confidence – COVID-19

We are still open for business as usual but we are closely following advice from the government in keeping you safe.

If you book a course (pay a deposit / full payment) and are then unable to attend by the time your course start date comes around due to the coronavirus (COVID-19) then we will re-schedule your course for a later date in the year with no loss of your deposit/full payment..

These coming weeks will be a very worrying time for all businesses country wide as general footfall may decrease and we hope you will support us through this time.

Here’s what we will do:

  • Re-schedule any course or courses if you are unable to attend due to coronavirus without losing your deposit or full payment.
  • We have antibacterial hand-wash to use as frequently as you like
  • Everyone works/trains in their own training bays and do not share hand tools
  • We have disposable latex gloves around the training centre for everyone to use
  • All equipment and tools are cleaned down with antibacterial wipes
  • We will keep the total number of students and staff within our 6500 sq ft construction training centre to below 25 people.

I hope the above will help you book a course with confidence and together we can take each day as it comes.

If you have coronavirus (COVID-19) symptoms, the NHS link is HERE.

 

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, BD4 9NW

Tel: 01274682199

By

”Fantastic training facility!” New YTA review

Thank you for such a great 5 star plumbing and bathroom tiling course review Jed!

Fantastic training facility! Having recently completed two courses with YTA (plumbing with Graham and three days bathroom tiling with Dave) I honestly can not recommend them enough. The group sizes are small, so you’re guaranteed to get a little bit of one-on-one help if you need it – and the instructors all know their stuff. There’s no time “wasted” spending day after day going through PowerPoint slides and doing paperwork, you’re straight into the practical stuff learning the basics before being shown how to put this to use in a “real” situation. They introduce you to tools, methods and equipment that your chosen course will see on a regular basis and explain it in a way that makes sense. I feel I’ve learned loads while I was there, and now I’m looking forward to putting it all into practice!

Plumbing and bathroom tiling course review
Plumbing and bathroom tiling course review

Jed also left a review on Google HERE

It was a pleasure to teach you Jed and we are glad you enjoyed your plumbing and bathroom tiling courses at YTA.

More reviews for YTA and our courses can be found at www.reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

Carpentry & Joinery Level 1 Review

We have received yet another 5 out of 5 review! The review has been left following the 10 day carpentry and joinery level 1 course.

Gareth Bass: Completed 10 day level 1 Carpentry & Joinery Course

I have just completed my two weeks Level 1 in carpentry and joinery. I really enjoyed my training over the two weeks, learning so many new skills in a friendly environment. My tutor Lawrence was great at explaining what we needed to do and demonstrating the technique used to complete the task. I would definitely recommend the YTA training centre if you are looking to start something new in the industry or further your skills. A big thank you to the team.

10 day carpentry and joinery course yta reviewThank you for a great Carpentry & Joinery Level 1 Review Gareth from all the YTA Team.

The 10 day Cskills level 1 Certificate in carpentry and joinery course is ideal if you are wanting to start a career in carpentry and eventually move on to gain your Cskills NVQ level 2 in Site Carpentry. No previous experience in carpentry & joinery is necessary before attending the 10 day level 1 carpentry and joinery course.

IMG_6586 YTA Level 1 Carpentry and Joinery Course
Building a stud partition

A brief course overview of topics covered in the 10 day NOCN Cskills Level 1 Certificate in Carpentry and Joinery Course:

  • Build a stud partition wall with a doorway
  • Hang a door including fitting of locks
  • Fitting of skirting and mouldings with external and internal corners
  • Scribing joints to fit mouldings and skirting
  • Site carpentry operations included in second fixings
  • Resources required to fix mouldings
  • Fixing mouldings
  • Terms used in partitioning
  • Resources required to carry out partitioning
  • Produce and assemble studwork partition
  • Variety of tools used and explained in carpentry and joinery

A £200 deposit is required to book the course, the balance of £1000 is then due on the first day of training.

10 day Carpentry course with NOCN Cskills level 1 certificate in carpentry and joinery £1200 inc vat.

IMG_6792 YTA Level 1 Carpentry and Joinery Course
Fitting door hinges

 

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

Email: info@ytatraining.com

YTA reviews

By

Carpentry NVQ Level 2 review

Another great 5 star carpentry NVQ l2 review has been left following the completion of the site carpentry NVQ EWPA (Experienced Worker Practical Assessment).

The EWPA is a NVQ assessment route enabling an experienced worker to achieve their NVQ level 2 in their relevant trade through a practical assessment. By using your skills acquired over the years to complete a task in our NVQ Centre (usually 1 day) which is then assessed. This qualification is the one required to attain the blue skilled worker CSCS card and gain construction site work.

David Clarke – YTA Carpentry NVQ review

I gained my carpentry nvq here at the age of 46 You really want to get your certification from here they are very professional and have a easy atmosphere the tutors are very experienced give it ago

Carpentry NVQ level 2 review

The EWPA NVQ assessor will evaluate your skills through professional discussion, witness testimonies and the practical assessment (as shown below in the two photos)

Units that make up the Site Carpentry NVQ Level 2

QCF641: Conform to general workplace safety
QCF642: Conform to efficient work practices
QCF643: Move and handle resources

Supported by THREE optional units to choose from:

QCF09: Install first fixing components
QCF10: Install second fixing components
QCF11: Erect structural carcassing components
QCF12: Maintain non-structural carpentry work
QCF628: Setting up and using transportable cutting and shaping machines in the workplace

Carpentry NVQ level 2 assessment front
Carpentry NVQ level 2 assessment front
Carpentry NVQ level 2 assessment back
Carpentry NVQ level 2 assessment back

Are you an experienced Carpenter / Joiner of 5 or more years? then you can spend 1 day at our CITB / NOCN Cskills approved NVQ Centre in Yorkshire completing the wood occupations site carpentry NVQ level 2 EWPA (Experienced Worker Practical Assessment). We run this assessment on Saturday’s 7:30am until approx 4pm depending on your time. We run the assessment at your training centre in Bradford, West Yorkshire.

The NVQ EWPA is a route enabling an experienced worker to achieve their NVQ level 2 in their relevant trade through practical assessment. This is a fast track nvq assessment route for experienced tradespersons.

By using your skills acquired over the years to complete a task in our CITB NVQ Centre (approximately 1 day but 2 days if needed) which is then assessed it is possible to achieve the required NVQ level 2 needed to gain access to site work.

We can do this entire NVQ carpentry assessment in 1 day if you are prepared to arrive at YTA for 7:30am until finish (approx 4pm).

TOTAL COST = £900 (£750 + VAT)

*****(£450 deposit gets the assessment booked. Then, £450 on the day of the assessment)*****

Once the deposit is paid we can get you registered so you can work on site with a temporary red CSCS card)

All EWPA Times are: 07.30am – Approx. 16.00pm

NVQ EWPA’s are held every week including weekends.

Tel: 01274682199

By

Excellent Multiple Courses YTA Review.

We have received an excellent multiple courses YTA review from an ex student after completing several courses. Nigel completed Tiling, Carpentry, Plumbing, Plastering, Bricklaying and Kitchen Fitting courses at YTA over several weeks and has since completed various projects including installing 3 bathrooms whilst renovating his properties as a landlord and is now completing his second kitchen installation. You can read his review of YTA and our tutors below:

Nigel Hammond YTA review

I attended a suite of YTA courses including Tiling, Carpentry, Plumbing, Plastering, Bricklaying and Kitchen Fitting. I was a novice, working in IT, with little more experience than the odd DIY job. I have used all the training as a landlord, renovating a few properties. I’ve installed 3 bathrooms (includes all appliances , tiling, and flooring), and I’m currently installing my 2nd kitchen (again involving plenty of plumbing, tiling, woodwork etc). As well as numerous other DIY tasks, around the place. I understand this would be a small fortune to pay tradespeople to do. I’ve done it myself, thanks to skills and confidence developed as a result of attending YTA courses, instructed by the excellent tutors Lorry, Dave, and Graham. I also gained a great deal of knowledge surrounded by industry trades people, also cross-training across disciplines. A very helpful perspective. I’ve plenty to learn in maintaining properties, but I think its helpful to get a good grounding in what is a multi-discipline/skill set of tasks. Many thanks to tutors and course colleagues.I recommend to anyone who wants to have a go and do a good job, and some might say, professional.

Thank you Nigel for an excellent 5 star multiple courses YTA review. It’s always lovely to see students put their training and skills to good use following the courses.

YTA reviews

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

Email: info@ytatraining.com