• Skip to main content
  • Skip to primary sidebar
  • Skip to footer

YTA Training

  • YTA Courses
    • Tiling Courses
    • Plumbing Courses
    • Plastering Courses
    • Joinery & Carpentry Courses
    • Kitchen Fitting Courses
    • Electrical Courses
    • Bricklaying Courses
    • Multi-Skill Courses
  • NVQ Level 2
    • NVQ Lv 2 OSAT
    • NVQ Lv 2 EWPA
  • Videos
  • Info
    • Courses, Qualifications & NVQ’s
    • Testimonials – YTA Reviews
    • Accommodation
    • FAQ
    • Finance
    • T & C’s
    • Media & Press
    • MOD Resettlement
    • Meet The Staff
    • YTA Trade Counter
    • Careers at YTA
    • Privacy Policy
    • Special Offers
    • Top Offer
  • Blog
  • Shop
  • COVID-19
  • Contact
  • Cart

NVQ

13th June 2020 By Graham Binns

Three NVQ’s achieved today!

We had three NVQ’s achieved today at YTA!

Two successful NVQ practical assessments in site carpentry NVQ level 2 and one in trowel occupations NVQ level 2 (bricklaying).

To gain the NVQ level 2 in just one day is only available to an experienced tradesperson with a minimum of 5 years experience through an assessment process called EWPA (Experienced Worker Practical Assessment). On the day of the EWPA you will be required to complete a practical assessment with your own tools within an allocated time to the awarding body specification (NOCN Cskills – Construction Skills). You will also be assessed through witness testimonies, professional discussion and direct questioning in order to cover all of the assessment criteria in the NVQ level 2.

Once you hold the NVQ level 2 along with your health and safety CSCS card test you can gain your blue skilled worker ‘skilled worker’ CSCS card. Once you have the NVQ level 2 your CSCS card will be upgraded to a blue card (skilled worker) and this means you can now work on any site completing your trade. We offer the following NVQ’s, Tiling NVQ Level 2, Plastering NVQ Level 2, Bricklaying NVQ Level 2, Carpentry & Joinery NVQ Level 2.

Site Carpentry 1 day NVQ level 2 EWPA
Site Carpentry 1 day NVQ level 2 EWPA at YTA
Site Carpentry 1 day NVQ level 2 EWPA
Site Carpentry 1 day NVQ level 2 EWPA at YTA
Bricklaying 1 day NVQ level 2 EWPA at YTA
Bricklaying 1 day NVQ level 2 EWPA at YTA

How the process works…

1) You contact us and enquire about EWPA for your trade. We will explain the process and ask you how many years experience you have in your trade area. You must have a minimum of 5 years experience and have experience & knowledge in all the NVQ units (as above) needed to gain the NVQ.

2) We will pass your details on to our NVQ assessor who will give you a call and complete what we call a ‘skills scan’. This is a chat amongst the two of you where he will want to know what type of work or projects you have been completing and for how long, he will want to know if you have experience and knowledge of the above NVQ units. He will explain that to achieve the NVQ you need to achieve all NVQ parts.

The NVQ parts…

NVQ Part 1) Witness testimonies. These are pre-printed in the NVQ EWPA pack and are sent out to you 2 weeks before your assessment date at our NVQ Centre in Bradford. You must get them signed by a trade related co-worker who has seen you complete this work in the last 3 years.

NVQ Part 2) Practical assessment. This is where you come to YTA and complete a practical assessment pre-set by the CITB – Now NOCN Cskills. The drawing plan with all specifications and measurements is sent out to you 2 weeks before this practical assessment. You must complete the assessment to spec and within the allocated time. You must bring you own tools for the assessment. Awaiting for you will be the materials to complete the task.

NVQ Part 3) Professional discussion. This is also completed at YTA on the same day as your practical assessment. The best way to describe this is like a structured discussion around the NVQ units. It is not a questions and answers session but more of a talking through jobs or projects you have completed and the assessor may ask you to elaborate on certain parts so you are effectively talking your way through the NVQ units as talking evidence. Thus turning your experience into the NVQ.

NVQ Part 4) Direct Questioning. Some assessment criteria within the nvq will ask you to ‘state’ or ‘describe’. These will be covered during the professional discussion or by direct questioning. The assessment criteria can be found on the specific trade NVQ pages listed above.

Time to book it and get on with it…

If you are happy to proceed and you feel confident and our NVQ assessor also feels confident in your ability and experience to achieve the NVQ we can go ahead with booking the NVQ. We require a deposit of £450. We then send you the documentation as detailed above and we will set your NVQ assessment date.

When you arrive for the NVQ assessment you will bring with you your signed witness testimonies and your tools. This is when you will pay the remaining balance of £450. You will then be inducted into the NVQ. During this day you will complete the practical assessment and professional discussion. Total price £900.

At the end of the day you will be told by the assessor if you have achieved or not achieved. If you have achieved you will be sent your certificate within 14 days (sometimes can be 7 days). You can now apply for your blue skilled worker CSCS card and get on site!

Please do not hesitate to contact us if you would like more information.

If you are out of work because you can’t get on site, we aim to complete this assessment within 2 weeks from your initial contact. You could be back on site earning a wage ASAP!

 

YTA is the UK’s premier training centre for construction training and assessment backed up by outstanding independent customer reviews on www.reveiws.co.uk (5 out of 5!)

YTA reviews

YTA reviews can be found at www.reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford

West Yorkshire, BD4 9NW

Tel: 01274682199

 

 

Filed Under: Bricklaying NVQ, Carpentry NVQ, EWPA, Joinery NVQ, Level 2, NVQ, NVQ assessment, YTA, YTA Training and Assessment Tagged With: 1 day bricklaying NVQ, 1 day carpentry nvq, EWPA, YTA Training And Assessment

16th May 2020 By Graham Binns

Three successful Carpentry NVQ’s today

We had three experienced carpenters successfully complete their Site Carpentry NVQ‘s today at YTA and we are happy to say that they all passed the 6 hour practical assessment. The Site Carpentry NVQ level 2 Diploma is gained through the EWPA (Experienced Worker Practical Assessment) if you have a minimum of 5 years experience working as Site Carpenter. We are so glad to say that we are off to a flying start following the lockdown period and all three achieved the 1 day NVQ level 2 practical assessment.

We have some new working practices in place which can be found on our COVID-19 PAGE and all went to plan, face-masks provided, social distancing and hand sanitiser stations around the centre all making the assessment process safe.

One of the three experienced carpenter completing his NVQ level 2 in site carpentry through EWPA today
One of the three experienced carpenter completing his NVQ level 2 in site carpentry through EWPA today

Are you an experienced Carpenter / Joiner of 5 or more years? then you can spend 1 day at our NOCN Cskills approved NVQ Centre in Yorkshire completing the wood occupations site carpentry NVQ level 2 EWPA (Experienced Worker Practical Assessment). We run this assessment on Saturday’s 7:30am until approx 4pm depending on your time. We run the assessment at our training centre in Bradford, West Yorkshire. The 1 day NVQ level 2 through EWPA costs £900 including vat, (£750 excl vat).

Successful Carpentry NVQ
Two out of the three experienced carpenters completing their NVQ level 2 in site carpentry through EWPA today

How do we assess during COVID-19 and keep social distancing

We have a very large assessment centre (6500 sq foot) and the EWPA requires the candidate to work on their own in a dedicated assessment area for an allocated amount of time to complete the practical assessment (between 6 and 9 hours depending on which trade). We can easily distance a maximum of 3 assessment areas within the centre 6m apart from each other. The assessor will assess at distance and when required at the end of the assessment, ask you to stand to one side so he can measure and mark your practical assessment.  So the carpentry NVQ level 2 is still running but with no more than 3 candidates per time in the building.

We really can get you your NVQ quickly

What if you need to be earning a wage again even before you’ve completed our carpentry EWPA route? Well, that’s not too much of a drama, either – you simply need to first secure your place and pay your deposit, so that we can get you registered. This will enable you to apply for and gain a temporary card lasting for a maximum of six months until you have completed the EWPA.

Don’t wait any longer to email the YTA team at info@ytatraining.com during COVID-19 lockdown and on 01274 682199, to book your place or to discuss how we can best serve your construction training / assessment requirements. YTA have been delivering successful Carpentry NVQ’s to experienced carpenters for 14 years now.

Successful Carpentry NVQ
Successfully completed carpentry NVQ at YTA

Well done to all three successful Carpentry NVQ’s candidates from the YTA team!

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

Email: info@ytatraining.com

YTA and our courses can be found at www.reviews.co.uk

YTA reviews

Filed Under: Blue card, Carpentry NVQ, COVID-19, EWPA, Fast track, Level 2, NVQ, NVQ assessment, Yorkshire, YTA, YTA Training and Assessment Tagged With: 1 day carpentry nvq, bradford, level 2 carpentry fast track, nvq level 2 in site carpentry, YTA Training And Assessment

23rd April 2020 By Graham Binns

Carpentry NVQ still running

Our site carpentry EWPA option could give you a Level 2 qualification in next to no time

There are certain things that anyone who wishes to become a professional carpenter needs to possess; a sound knowledge of building and construction, considerable attention to detail, a good ability to work well with others, the ability to use, repair and maintain tools and machinery…One more thing that you will definitely require if you are to gain site work as a skilled worker, though, is the blue skilled worker CSCS card. And if you are to obtain that, you’ll need to have the right qualification under your belt. That qualification is an NVQ Level 2 in carpentry, and while various construction training providers up and down the UK give you the opportunity to earn this qualification, there are few that make it as pleasurable as we do here at YTA!

 

The renowned fast-track route for joiners with previous experience

‘EWPA’ is short for ‘Experienced Worker Practical Assessment’. The purpose of this particular NVQ route is to enable someone whois already experienced in their chosen trade to achieve a Level 2 qualification much more quickly than would be the case if they were completely ‘starting afresh’ with their training.

In keeping with our reputation as one of the UK’s premier construction training providers, YTA offers EWPA fast-track options to those wishing to earn qualifications in not only site carpentry, but also wall and floor tiling, bricklaying and plastering. Focusing specifically on the site carpentry EWPA route, though, as long as you have five or more years’ joinery experience and both you and our NVQ assessor are confident about your chances of passing, you will be entitled to book a one or two-day assessment with us. This time you spend at our training centre will allow us to evaluate your skills through a combination of professional discussion, witness testimonies and the practical assessment.

If you are happy to arrive at our premises for 7:30am, we will be able to complete the entire NVQ carpentry assessment for you in one day. When the day concludes, the assessor will inform you whether or not you have achieved, and if you have, your certificate will be sent to you within 14 days.

 

How do we assess during COVID-19 and keep social distancing

We have a very large assessment centre (6500 sq foot) that is currently closed for our usual 5 & 10 days training courses but we are still assessing for NVQ level 2 qualifications through EWPA (Experienced Worker Practical Assessments) at the weekends. The EWPA requires the candidate to work on their own in a dedicated assessment area for an allocated amount of time to complete the practical assessment (between 6 and 9 hours depending on which trade). We can easily distance a maximum of 3 assessment areas within the centre 6m apart from each other. The assessor will assess at distance and when required at the end of the assessment, ask you to stand to one side so he can measure and mark your practical assessment.  So the carpentry NVQ level 2 is still running but with no more than 3 candidates per time in the building.

If you would like to gain your NVQ through the EWPA route or would like more information the please email info@ytatraining.com and the assessor will give you a call back within 24 hours.

 

We really can quickly get you you NVQ quickly

What if you need to be earning a wage again even before you’ve completed our carpentry EWPA route? Well, that’s not too much of a drama, either – you simply need to first secure your place and pay your deposit, so that we can get you registered. This will enable you to apply for and gain a temporary card lasting for a maximum of six months until you have completed the EWPA.

Don’t wait any longer to email the YTA team at info@ytatraining.com during COVID-19 lockdown and on 01274 682199 once we are all back at work, to book your place or to discuss how we can best serve your construction training / assessment requirements.

Carpentry NVQ level 2 assessment back
Carpentry NVQ level 2 assessment back
Carpentry NVQ level 2 assessment front
Carpentry NVQ level 2 assessment front

 YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

Email: info@ytatraining.com

YTA and our courses can be found at www.reviews.co.uk

YTA reviews

 

Filed Under: Carpentry NVQ, EWPA, Level 2, NVQ, NVQ assessment Tagged With: 1 day carpentry nvq, carpentry course, level 2 carpentry fast track, nvq level 2 in site carpentry, Yorkshire, YTA review, YTA Training And Assessment

29th November 2019 By Graham Binns

Could an NVQ Level 2 carpentry diploma be yours through the EWPA route?

Could an NVQ Level 2 carpentry diploma be yours through the EWPA route?

We may be home to a wide range of carpentry and joinery courses here at YTA – encompassing both five-day and 10-day options – but you don’t necessarily need to undertake any of these to significantly upgrade your qualifications.

That’s because, if you have already been a carpenter for five or more years, you could obtain a Cskills Awards NVQ Level 2 Carpentry Diploma in Wood Occupations (Construction) within the space of a day, when you pursue our fast-track assessment route. You can be up and running with site work in next to no time.

Requiring approximately one day of your time – or possibly two days – at our NOCN Cskills-approved centre in Yorkshire, our Experienced Worker Practical Assessment (EWPA) option will allow you to demonstrate the skills and knowledge needed to achieve an NVQ Level 2. Your skills will be evaluated on the basis of professional discussion, witness testimonies and the practical assessment.

Indeed, there are three mandatory units that constitute this Site Carpentry NVQ Level 2, relating to the essential matters of general workplace safety, efficient work practices and the moving and handling of resources.

Carpentry NVQ level 2 assessment back
Carpentry NVQ level 2 assessment back
Carpentry NVQ level 2 assessment front
Carpentry NVQ level 2 assessment front

In addition to completing these units, you will be able to further support your bid for the NVQ Level 2 qualification by undertaking three optional units. With such subjects as the installation of first fixing components, the installation of second fixing components and the maintenance of non-structural carpentry work featuring in these units, they could be integral to your efforts to pass the EWPA route with YTA.

Complete all of the above to satisfaction, and you will be told at the end of the day that you have achieved the certificate, which will then be sent to you within 14 days, or perhaps even seven days. This, in turn, will enable you to apply for blue skilled worker CSCS card, so that you can get on site.

Enquire now about the joinery courses that best suit your needs as we touched on above, various carpentry and joinery courses are available here at YTA to suit different levels of skills, experience and ambition.

So, why not talk to us now to establish which of these paths represents the step you should take next in your career? Call the YTA team now on 01274 682199, and we’ll be able to clarify any uncertainties that you may have, as well as – if you are ready – take your booking.

YTA is the UK’s premier training centre for construction training and assessment backed up by outstanding independent customer reviews on www.reveiws.co.uk (5 out of 5!)

To book please phone the YTA Team

Tel: 01274682199

Carpentry NVQ level 2 review
Carpentry NVQ level 2 review

Filed Under: Carpentry, Carpentry NVQ, EWPA, Homepage News, Joinery NVQ, NVQ, NVQ assessment, Training centre, Yorkshire, YTA, YTA Training and Assessment Tagged With: 1 day carpentry nvq, level 2 carpentry fast track, nvq level 2 in site carpentry, Yorkshire, YTA

15th August 2019 By Graham Binns

NVQ level 2 in Site Carpentry EWPA YTA Review

We’ve just had a great review left following the completion of the NVQ level 2 in Site Carpentry. The NVQ level 2 was gained through EWPA (Experienced Worker Practical Assessment) and takes 1 full day at YTA.

Rob’s review is below:

Hi All. After many years of carpentry I decided to update my c.v with a NVQ. It is at that point I realised my struggle with dyslexcia. I plucked the courage to call the first company I saw online. And what an important call it was. From the very moment I called YTA and explained my condition to the guys on the office. It wasn’t any trouble what so ever to accommodate myself. Firstly Graham. Books you in. Prior to attending Mark calls you. On that call it’s all about the task. Relax! It’s easy. With years of skill you will think it’s a doddle trust me! Mark is the examiner on the day of the test but to be fair you will already know him. This is due to him going threw everything on the calls leading up to the test day. You will then receive a plan in the post which is what you’ll build on the day. In the plan pack will be some questions. Again if in doubt just call The office or Mark. Couldn’t be simpler! On the day. Nerves flowing arrive at the centre nice and early. Booom! Cuppa tea and and choccie bickies. It really wasn’t was I was expecting. Mark on the day was absolutely outstanding. (Thanks Mark) Graham in the office. Mr cool! Was just so erm? Cool an that. All my materials all there waiting for me to drink me tea. Stand by GO. Nice clean workspace was provided all good timber. Remember I am dyslexic. Always someone walking around to ask if I was on any doubt at all. I was even asked did I require a blue overlay to read a little easier. They had also had my plans blown up to a bigger size for me. I really couldn’t say it more clearer. Go see the staff at YTA for all your trades certs. I promise you for my experience they have all been truly amazing. A massive massive thanks to Mark Dale and Graham for all your help throughout every step of my journey. Ps. Booooom cert arrived.

NVQ level 2 in Site Carpentry EWPA YTA Review

The above review plus many more can be found at www.reviews.co.uk

Do you wish to undertake NVQ level 2 in Site Carpentry?

Do you have at least 5 years experience in your trade? Then you can spend 1 full day at our NOCN approved NVQ Centre in Yorkshire completing your NVQ level 2 through EWPA (Experienced Worker Practical Assessment).

The EWPA is a NVQ assessment route enabling an experienced worker to achieve their NVQ level 2 in their relevant trade through a practical assessment. By using your skills acquired over the years to complete a task in our NVQ Centre (usually 1 day) which is then assessed. This qualification is the one required to attain the blue skilled worker CSCS card and gain construction site work.

The EWPA NVQ assessor will evaluate your skills through professional discussion, witness testimonies and the practical assessment.

Units that make up the Site Carpentry NVQ Level 2

QCF641: Conform to general workplace safety
QCF642: Conform to efficient work practices
QCF643: Move and handle resources

Supported by THREE optional units to choose from:

QCF09: Install first fixing components
QCF10: Install second fixing components
QCF11: Erect structural carcassing components
QCF12: Maintain non-structural carpentry work
QCF628: Setting up and using transportable cutting and shaping machines in the workplace

Assessment Criteria for NVQ Level 2 Diploma in Wood Occupations – Site Carpentry: The assessment criteria for the above units for the carpentry NVQ can be found by clicking HERE. You will be assessed through practical assessment, witness testimonies, professional discussion and direct questioning in order to cover all of the assessment criteria

Cskills Awards L2 NVQ Diploma in Wood Occupations (Construction) – Site Carpentry QUA900

Price £900

 

Fast track NVQ for carpenters. Carpentry NVQ level 2 at YTA.

How the process works…

1) You contact us and enquire about EWPA for your trade. We will explain the process and ask you how many years experience you have in your trade area. You must have a minimum of 5 years experience and have experience & knowledge in all the NVQ units (as above) needed to gain the NVQ.

2) We will pass your details on to our NVQ carpentry assessor who will give you a call and complete what we call a ‘skills scan’. This is a chat amongst the two of you where he will want to know what type of work or projects you have been completing and for how long, he will want to know if you have experience and knowledge of the above NVQ units. He will explain that to achieve the NVQ in Carpentry you need to achieve all NVQ parts.

The NVQ parts…

NVQ Part 1) Witness testimonies. These are pre-printed in the carpentry NVQ pack and are sent out to you 2 weeks before your assessment date at our NVQ Centre in Bradford. You must get them signed by a trade related co-worker who has seen you complete this work in the last 3 years.

NVQ Part 2) Practical assessment. This is where you come to YTA and complete a practical assessment pre-set by the CITB. The drawing plan with all specifications and measurements is sent out to you 2 weeks before this practical assessment. You must complete the assessment to spec and within the allocated time. You must bring you own tools for the assessment. Awaiting for you will be the materials to complete the task.

NVQ Part 3) Professional discussion. This is also completed at YTA on the same day as your practical assessment. The best way to describe this is like a structured discussion around the NVQ carpentry units. It is not a questions and answers session but more of a talking through jobs or projects you have completed and the assessor may ask you to elaborate on certain parts so you are effectively talking your way through the NVQ units as talking evidence. Thus turning your experience as a carpenter onto the NVQ.

NVQ Part 4) Direct Questioning. Some assessment criteria within the carpentry nvq will ask you to ‘state’ or ‘describe’. These will be covered during the professional discussion or by direct questioning. The assessment criteria can be found below the carpentry nvq units listed above.

Time to book it and get on with it…

If you are happy to proceed and you feel confident and our NVQ assessor also feels confident in your ability and experience to achieve the NVQ we can go ahead with booking the carpentry NVQ. We require a deposit of £450. We then send you the documentation as detailed above and we will set your carpentry NVQ assessment date.

When you arrive for the NVQ assessment you will bring with you your signed witness testimonies and your tools. This is when you will pay the remaining balance of £450. You will then be inducted into the NVQ. During this day you will complete the practical assessment and professional discussion. Total price £900.

At the end of the day you will be told by the assessor if you have achieved or not achieved. If you have achieved you will be sent your certificate within 14 days (sometimes can be 7 days). You can now apply for your blue skilled worker CSCS card and get on site!

Please do not hesitate to contact us if you would like more information.

If you would like to book a course or look around the centre we have an open door policy and you can visit YTA Training anytime without an appointment between 8:30am and 5pm Monday to Friday.

Contact today on 01274682199

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire, BD4 9NW

 

Filed Under: Bradford, Carpentry NVQ, EWPA, Joinery, Level 2, NVQ, NVQ assessment, OSAT, Qualification, Qualified, Review, Yorkshire, YTA, YTA Training and Assessment Tagged With: 1 day carpentry nvq, carpentry ewpa, carpentry nvq, level 2 carpentry fast track, nvq level 2 in site carpentry, YTA, YTA review, YTA Training And Assessment

26th July 2018 By Graham Binns

Selection Of Photos Taken In June and July Around The Training Centre

Its been a busy couple of months, here’s a small selection of photos taken at various moments around the training centre during June and July. Courses range from tiling, plastering, plumbing, carpentry & joinery, kitchen fitting and bricklaying. NVQ level 2 and level 1 certificates are available for most trades.

IMG_4653
IMG_4540
IMG_4529
IMG_4567
IMG_4527
IMG_4613
IMG_4538
IMG_4528
IMG_4592
IMG_4562
IMG_4579
IMG_4535
IMG_4550
IMG_4548
IMG_4534
IMG_4537
IMG_4599
IMG_4539
IMG_4542
IMG_4543
IMG_4544
IMG_4568
IMG_4545
IMG_4549
IMG_4530
IMG_4552
IMG_4555
IMG_4556
IMG_4557
IMG_4558
IMG_4541
IMG_4601
IMG_4561
IMG_4566
IMG_4570
IMG_4571
IMG_4577
IMG_4605
IMG_4580
IMG_4581
IMG_4583
IMG_4585
IMG_4587
IMG_4589
IMG_4590
IMG_4591
IMG_4593
IMG_4622
IMG_4597
IMG_4603
IMG_4604

Filed Under: 10 day course, 5 day course, Accredited course, Bradford, Bricklaying course, Carpentry course, Construction course, Courses, Fast track, Intensive course, Joinery course, Kitchen Fitting Course, NVQ, Plastering course, Plumbing course, Qualification, Tiling course, Training centre, Worktop fitting course, Yorkshire, YTA Training and Assessment

  • Go to page 1
  • Go to page 2
  • Go to Next Page »

Primary Sidebar

Your Shopping Cart

Your cart is empty

Search

Recent Posts

  • What could you get out of a 5-day Level 1 tiling course at YTA?
  • A Level 2 bricklaying qualification could be yours in just a day
  • What’s the difference between our five-day and 10-day Level 1 plumbing courses?
  • Our one-day carpentry EWPA route could significantly advance your career
  • Join us for five or 10 days to start – or upgrade – your plastering career
  • A bricklaying Level 2 diploma can be yours in just a day, if you’re experienced 
  • YTA To Remain Open As Education Setting
  • From novice status to a fledgling career in carpentry – it’s possible in 10 days

Footer

Company Profile

• YTA is the UK’s premier training centre for construction training and assessment backed up by outstanding independent customer reviews on www.reveiws.co.uk (5 out of 5!)
• Small class sizes
• Intensive practical ‘hands on’ courses
• NOCN Cskills approved centre for level 1 training based qualifications and NVQ level 2 & level 3’s
• Established construction training provider since 2006
• Multi-skill trade centre for all your training needs
• Experienced & qualified trainers and assessors

YTA is an approved training provider and has accreditation to offer nationally recognised qualifications on behalf of NOCN Cskills (Construction Skills) formally CITB (Construction Industry Training Board)

Privacy & Cookies: This site uses cookies. By continuing to use this website, you agree to their use.
To find out more, including how to control cookies, see here: Cookie Policy

Recent posts

  • What could you get out of a 5-day Level 1 tiling course at YTA?
  • A Level 2 bricklaying qualification could be yours in just a day
  • What’s the difference between our five-day and 10-day Level 1 plumbing courses?
  • Our one-day carpentry EWPA route could significantly advance your career
  • Join us for five or 10 days to start – or upgrade – your plastering career
  • A bricklaying Level 2 diploma can be yours in just a day, if you’re experienced 
  • YTA To Remain Open As Education Setting
  • From novice status to a fledgling career in carpentry – it’s possible in 10 days

Search

TILING COURSE – PLASTERING COURSE – PLUMBING COURSE – JOINERY COURSE – INTENSIVE SHORT CONSTRUCTION COURSES

© 2021 YTA Training & Assessment Ltd

Tel: 01274 682199

    Facebook