YTA Training

Fast track

By

Weekend Plumbing Course Still Available

We still have some places available for this coming weekend for our 4 day weekend plumbing courses.

On the first weekend you will cover the basics of using plumbing tools, cutting and jointing pipe by compression joints, soldering, push-fit and also pipe bending.

You will also fit a full 3 piece bathroom suite and plumb it in up-to working pressure with copper pipe. If you have any leaks you will also fix them! Tips, tricks and fault finding all included in this very hands on practical training course.

Weekend plumbing course

On the second weekend of the weekend plumbing course you will cover the installation and removal of radiators, fitting radiator valves and plumbing the radiators up to pressure. A discussion on the principles of the radiator system and fault finding etc. Once the radiators are full and up-to pressure you will cover radiator removal and replacement, again all this is done in your own bay on the course and up-to pressure to imitate your home scenario.

For more details on our weekend plumbing course and to BOOK THIS COURSE please follow this link HERE.

We are running weekend courses on the below dates:

  • Saturday 22.8.2020 / Sunday 23.8.2020 + Saturday 29.8.2020 / Sunday 30.8.2020 (We are open bank holidays)
  • Saturday 26.9.2020 / Sunday 27.9.2020 + Saturday 3.10.2020 / Sunday 4.10.2020
  • Saturday 31.10.2020 / Sunday 1.11.2020 + Saturday 7.11.2020 / Sunday 8.11.2020

YTA is the UK’s premier training centre for construction training and assessment backed up by outstanding independent customer reviews on www.reveiws.co.uk (5 out of 5!)

PLEASE NOTE: We are following new regulations due to COVID-19, SEE HERE what we have put into place to help keep everyone safe at YTA.

 

YTA is the UK’s premier training centre for construction training and assessment backed up by outstanding independent customer reviews on www.reveiws.co.uk (5 out of 5!)

YTA reviews

YTA reviews can be found at www.reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, BD4 9NW

Tel: 01274 682199

By

Three successful Carpentry NVQ’s today

We had three experienced carpenters successfully complete their Site Carpentry NVQ‘s today at YTA and we are happy to say that they all passed the 6 hour practical assessment. The Site Carpentry NVQ level 2 Diploma is gained through the EWPA (Experienced Worker Practical Assessment) if you have a minimum of 5 years experience working as Site Carpenter. We are so glad to say that we are off to a flying start following the lockdown period and all three achieved the 1 day NVQ level 2 practical assessment.

We have some new working practices in place which can be found on our COVID-19 PAGE and all went to plan, face-masks provided, social distancing and hand sanitiser stations around the centre all making the assessment process safe.

One of the three experienced carpenter completing his NVQ level 2 in site carpentry through EWPA today
One of the three experienced carpenter completing his NVQ level 2 in site carpentry through EWPA today

Are you an experienced Carpenter / Joiner of 5 or more years? then you can spend 1 day at our NOCN Cskills approved NVQ Centre in Yorkshire completing the wood occupations site carpentry NVQ level 2 EWPA (Experienced Worker Practical Assessment). We run this assessment on Saturday’s 7:30am until approx 4pm depending on your time. We run the assessment at our training centre in Bradford, West Yorkshire. The 1 day NVQ level 2 through EWPA costs £900 including vat, (£750 excl vat).

Successful Carpentry NVQ
Two out of the three experienced carpenters completing their NVQ level 2 in site carpentry through EWPA today

How do we assess during COVID-19 and keep social distancing

We have a very large assessment centre (6500 sq foot) and the EWPA requires the candidate to work on their own in a dedicated assessment area for an allocated amount of time to complete the practical assessment (between 6 and 9 hours depending on which trade). We can easily distance a maximum of 3 assessment areas within the centre 6m apart from each other. The assessor will assess at distance and when required at the end of the assessment, ask you to stand to one side so he can measure and mark your practical assessment.  So the carpentry NVQ level 2 is still running but with no more than 3 candidates per time in the building.

We really can get you your NVQ quickly

What if you need to be earning a wage again even before you’ve completed our carpentry EWPA route? Well, that’s not too much of a drama, either – you simply need to first secure your place and pay your deposit, so that we can get you registered. This will enable you to apply for and gain a temporary card lasting for a maximum of six months until you have completed the EWPA.

Don’t wait any longer to email the YTA team at info@ytatraining.com during COVID-19 lockdown and on 01274 682199, to book your place or to discuss how we can best serve your construction training / assessment requirements. YTA have been delivering successful Carpentry NVQ’s to experienced carpenters for 14 years now.

Successful Carpentry NVQ
Successfully completed carpentry NVQ at YTA

Well done to all three successful Carpentry NVQ’s candidates from the YTA team!

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

Email: info@ytatraining.com

YTA and our courses can be found at www.reviews.co.uk

YTA reviews

By

Plumbing course video review by Josef Faddoul

YTA Plumbing course video review by Josef Faddoul.

Another great plumbing course video review is now available to watch on our YouTube channel! Josef Faddoul completed the 5 day plumbing course in February 2020 and was more than happy with the training and support he received throughout the plumbing course that he immediately booked more courses with YTA.

Whats Covered on the plumbing course:

The 5 day plumbing course will see you working with copper pipe and fixings, plumbing in a bathroom, a small 3 radiator system including thermostatic radiator valves, understanding different heating systems, plumbing in a kitchen sink including waste pipes plus plenty of fault finding and repair work throughout the week.

Thank you for such a great YTA plumbing course review Josef, looking forward to having you back at YTA to complete your other courses.

The YTA team.

YTA reviews

More YTA reviews can be found at www.reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

We are open for business

We are open for business and our courses are still running every week. Our training centre is a large 6500 sq foot, high ceiling well ventilated area with individual training bays AND tools per person. We have latex gloves and masks to wear if required along with hand-wash and cleaning wipes and we only teach small class numbers on average 5 per class.

All hands-on practical training out in the centre learning. Here’s a selection of photos taken this week and last week from the plumbing, tiling, carpentry and plastering courses.

If on the Government advice, businesses like ours are asked to close, we can re-schedule courses for a later date. With a little help and goodwill we will all get through this, we’ll support you, we ask you support us.

We do have a policy if you cant attend due to coronavirus which can be found here. 

 

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary we are open for business Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

Email: info@ytatraining.com

YTA and our courses can be found at www.reviews.co.uk

YTA reviews

By

5 star reviews for 2 day plastering & 2 day worktop fitting

Two recent 5 star reviews following the completion of the 2 day plastering course and 2 day worktop fitting course.

Tim Falkner – 2 day plastering skimming course

I did the 2 day skimming course. By the first day had skimmed a wall and ceiling. Dave the instructor was very easy to work with teaching me the right techniques to skim. Highly recommend

Anonymous – 2 day worktop fitting course

I have just recently done the 2 day kitchen worktop course and I must say the guy Laurence who was my tutor was excellent he was looking after me and several joiners all at once . But I came with with what I needed and would highly recommend .

 

2 day plastering and worktop fitting course reviews
2 day plastering and worktop fitting course reviews

 

Course Descriptions:

The 2 day Plastering Course is £180 including vat and available most weeks on any 2 consecutive days. It will be 2 days of solid graft with 100% focus on achieving a smooth finish plastered wall. There’ll be no business start up or peripherals just all day mixing and plastering.

The aim of the 2 day worktop course will be to fit a worktop professionally. The course is £250 and you will use a router and worktop jig to create the worktop ‘masons mitre’ fitment into a corner area. You will also cut out for a kitchen sink and fit the kitchen sink.

  • You will use tools such as:
  • Router
  • Worktop Jig
  • Circular saw
  • Jigsaw
  • Square
  • Clamps
  • And other joiners tools to create a professional finish.

You will use professional kitchen fitting tools form jig saws, circular saws and routers. You will be shown every aspect of setting up each tool along with handy tips along the way on how to use the tools for different materials.

 

To book on the next available 2 day plastering course or 2 day worktop course you can either check the available dates on the website or call the centre on 01274682199 to book. YTA is based in Bradford, West Yorkshire and is not too far from Leeds. We are ideally located  near to the M62 motorway Junction 26.

YTA Training and Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, BD4 9NW, West Yorkshire

Tel: 01274682199

By

YTA Worktop fitting course review

A new 5 star review has been left on google reviews following the completion of the YTA worktop fitting course.

Worktop fitting training was just what I was looking for to refine my skills.

Learn at own pace and enjoyable

The review was left on Google Reviews.

The aim of the 2 day worktop course will be to fit a worktop professionally. You will use a router and worktop jig to create the worktop ‘masons mitre’ fitment into a corner area. You will also cut out for a kitchen sink and fit the kitchen sink.

  • You will use tools such as:
  • Router
  • Worktop Jig
  • Circular saw
  • Jigsaw
  • Square
  • Clamps
  • And other joiners tools to create a professional finish.

You will use professional kitchen fitting tools form jig saws, circular saws and routers. You will be shown every aspect of setting up each tool along with handy tips along the way on how to use the tools for different materials.

Check out our time-lapse worktop router video below.

More reviews for YTA and our courses can be found at www.reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

    Facebook