YTA Training

Plastering course

By

New 5 star reviews for YTA

New 5 star reviews have been left following the completion of YTA courses. The reviews were yet again 5 stars!

William James completed the plumbing, tiling and plastering courses over a 3 week period back of consecutive weeks. The courses are are all very hands on with practically focused training and he has left a fantastic new 5 star review for YTA.

William new 5 star YTA review
William new 5 star YTA review

I have just completed 3 weeks training with YTA; 5 days plumbing, 5 days tiling and 5 days plastering. I had little or no experience of these skills/trades before starting, other than watching a few YouTube videos. The training facility is well laid out and has everything you could need. All 3 coursed have a good level of content and progress logically with the pace of the course adapting to the skills and speed of the students. All the trainers have a wealth of knowledge which they are eager to pass on. They bring their years of trade experience to the training in an open and easy to understand way. As well as great instruction you can’t put a value on the practical experience gained on the courses. You can listen to instruction a watch YouTube all you want but you cannot beat getting your hands on the tools and practicing what you have learned. The way the training and the facility is designed and laid out enables you to do exactly this with lots of practical scenarios that cover many different situations without worrying about causing damage etc. I highly recommend YTA.

Thank you William for such a great review and we are glad you enjoyed the plumbing, tiling and plastering courses.

We also received another new 5 star review for YTA this past couple of days from Vinod who completed the 5 day plumbing course last week. Another great review and another 5 stars, thank you so much!

Vinod plumbing course review
Vinod plumbing course review

I have learn a lot form this training place and will go again to get more training again soon if you want to know more about go and get trained up at this place you will get the best, see you soon my rate is 5

We love receiving new 5 star reviews for YTA following the competition of our courses so please do keep sending them in.

YTA we collect verified and genuine reviews from www.reviews.co.uk.

YTA reviews

More YTA reviews can be found at www.reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

First week back!

It’s our first week back following lockdown and we are glad to report that our new working practices and social distancing is going really well. Plumbing and tiling courses were our first courses back training and we asked several students what they thought of our new COVID-19 safe set up to maintain safe working / training practices and all feedback was excellent and reassuring.

Here are a few photos form the first week back during the first couple of days.

Next week the plastering courses will start and followed by the carpentry courses. By the end of June we will be fully up and running with a safe phased return to training.

 

 

YTA reviews

YTA reviews can be found at www.reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford

West Yorkshire, BD4 9NW

Tel: 01274682199

 

By

Excellent Multiple Courses YTA Review.

We have received an excellent multiple courses YTA review from an ex student after completing several courses. Nigel completed Tiling, Carpentry, Plumbing, Plastering, Bricklaying and Kitchen Fitting courses at YTA over several weeks and has since completed various projects including installing 3 bathrooms whilst renovating his properties as a landlord and is now completing his second kitchen installation. You can read his review of YTA and our tutors below:

Nigel Hammond YTA review

I attended a suite of YTA courses including Tiling, Carpentry, Plumbing, Plastering, Bricklaying and Kitchen Fitting. I was a novice, working in IT, with little more experience than the odd DIY job. I have used all the training as a landlord, renovating a few properties. I’ve installed 3 bathrooms (includes all appliances , tiling, and flooring), and I’m currently installing my 2nd kitchen (again involving plenty of plumbing, tiling, woodwork etc). As well as numerous other DIY tasks, around the place. I understand this would be a small fortune to pay tradespeople to do. I’ve done it myself, thanks to skills and confidence developed as a result of attending YTA courses, instructed by the excellent tutors Lorry, Dave, and Graham. I also gained a great deal of knowledge surrounded by industry trades people, also cross-training across disciplines. A very helpful perspective. I’ve plenty to learn in maintaining properties, but I think its helpful to get a good grounding in what is a multi-discipline/skill set of tasks. Many thanks to tutors and course colleagues.I recommend to anyone who wants to have a go and do a good job, and some might say, professional.

Thank you Nigel for an excellent 5 star multiple courses YTA review. It’s always lovely to see students put their training and skills to good use following the courses.

YTA reviews

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

Email: info@ytatraining.com

By

September & October course photos at YTA

September and October course photos at YTA , just a small selection but showing what we get up to on the courses. Bricklaying, tiling, plastering, plumbing, kitchen fitting, carpentry & joinery. We also did electrics too! We ran the Domestic Electrical Installer course which got some excellent feedback, we are next running the next DEI course in February 2020. Course photos are below:

As usual our reviews can be found at www.reviews.co.uk/YTA

 

 

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

5-day and 10-day Level 1 courses are both available from us for budding plasterers

When you’re looking to get into plastering for the first time – including not only learning this rewarding trade, but also acquiring a qualification from the outset, or at least putting yourself ‘en route’ to such a qualification – it’s well worth seeking out Cskills Level 1 plastering courses.

Our own renowned Yorkshire NVQ training centre here at YTA, for example, offers you both a five-day and 10-day course in this category. So, in what ways do these plastering courses differ, and how can you be sure of choosing the right one for your present needs?

You’ll cover considerable ground in the shortest spell of time  

While both of these Cskills Level 1 plastering courses are suitable for complete beginners in addition to other tradespeople who would like to add plastering skills to their armoury, it is important to appreciate that the five-day course is a unit accreditation course.

This means that if you wish to obtain a complete Level 1 qualification during your time with us – namely the NOCN Cskills Level 1 Certificate in Plastering – you’ll need to book the 10-day course.

Whichever course you do choose for now, though, you’ll still benefit from top-to-bottom training that’ll take you a massive step closer to a fruitful career in plastering – or even just give you the skills to take on that DIY project with much more confidence, should you not be interested in pursuing plastering as a profession.

The five-day course alone, for example, covers the likes of health and safety, starting up in business as a plasterer, what plaster goes where, the boarding up of stud walls and ceilings, skimming to plasterboard, repair plastering, plastering to ceilings, the setting of bonding beads, and so much more.

Oh, and for your course fee, you’ll also be given a set of plastering tools for use during the course, together with a full-size plastering training bay that you won’t have to share with anyone. That’ll give you the full scope to learn via trial and error, while receiving all of the assistance you could need – helped by the low student to teacher/trainer ratios we maintain.

Don’t take risks with any less than the highest-rated training centre

If you have any further questions that will help you to determine whether the five-day or 10-day course is the right one for you, don’t hesitate to contact the YTA team directly – even perhaps arranging an in-person visit prior to booking, if you wish.

Call 01274 682199 or 07400 922788, or email info@ytatraining.com to find out more about the plastering courses and other training opportunities that we offer for novice or more experienced tradespeople and DIY enthusiasts alike, as well as to reserve your place on your favoured course.

 

 

By

5 star reviews for 2 day plastering & 2 day worktop fitting

Two recent 5 star reviews following the completion of the 2 day plastering course and 2 day worktop fitting course.

Tim Falkner – 2 day plastering skimming course

I did the 2 day skimming course. By the first day had skimmed a wall and ceiling. Dave the instructor was very easy to work with teaching me the right techniques to skim. Highly recommend

Anonymous – 2 day worktop fitting course

I have just recently done the 2 day kitchen worktop course and I must say the guy Laurence who was my tutor was excellent he was looking after me and several joiners all at once . But I came with with what I needed and would highly recommend .

 

2 day plastering and worktop fitting course reviews
2 day plastering and worktop fitting course reviews

 

Course Descriptions:

The 2 day Plastering Course is £180 including vat and available most weeks on any 2 consecutive days. It will be 2 days of solid graft with 100% focus on achieving a smooth finish plastered wall. There’ll be no business start up or peripherals just all day mixing and plastering.

The aim of the 2 day worktop course will be to fit a worktop professionally. The course is £250 and you will use a router and worktop jig to create the worktop ‘masons mitre’ fitment into a corner area. You will also cut out for a kitchen sink and fit the kitchen sink.

  • You will use tools such as:
  • Router
  • Worktop Jig
  • Circular saw
  • Jigsaw
  • Square
  • Clamps
  • And other joiners tools to create a professional finish.

You will use professional kitchen fitting tools form jig saws, circular saws and routers. You will be shown every aspect of setting up each tool along with handy tips along the way on how to use the tools for different materials.

 

To book on the next available 2 day plastering course or 2 day worktop course you can either check the available dates on the website or call the centre on 01274682199 to book. YTA is based in Bradford, West Yorkshire and is not too far from Leeds. We are ideally located  near to the M62 motorway Junction 26.

YTA Training and Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, BD4 9NW, West Yorkshire

Tel: 01274682199

Facebook