YTA Training

carpentry course

By

September & October course photos at YTA

September and October course photos at YTA , just a small selection but showing what we get up to on the courses. Bricklaying, tiling, plastering, plumbing, kitchen fitting, carpentry & joinery. We also did electrics too! We ran the Domestic Electrical Installer course which got some excellent feedback, we are next running the next DEI course in February 2020. Course photos are below:

As usual our reviews can be found at www.reviews.co.uk/YTA

 

 

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

Carpentry & Joinery course review at YTA – Philip Porter

”I would definitely recommend” is what Philip Porter had to say following the completion of the 10 day carpentry and joinery course. Please see below the carpentry and joinery course review at YTA.

I attended the 10 day joinery course in October 19. The course was well presented with all the materials and tools available. Lawrence, the teacher was always there for you and as the classes were small he could spend plenty of time with each student. He explained and demonstrated clearly and you could tell he was a master craftsman. There was tea, coffee and biscuits available all day. I feel confident taking my skills out on to site now. I would definitely recommend and I’ll hopefully be doing other courses in time.

Thank you for such a great review Philip of your time at YTA whilst completing the 10 day carpentry and joinery course. Much appreciated.

Thanks again.
From the YTA Team

 

YTA Carpentry & Joinery course review by Philip Porter - Oct 19
YTA Carpentry & Joinery course review by Philip Porter – Oct 19

To read more reviews please follow this LINK.

The 10 day intensive carpentry and joinery course is ideal if you are wanting to start a career in carpentry & joinery and eventually move on to gain your NVQ level 2 in Site Carpentry. No previous experience in carpentry is necessary.

Throughout the course you will cover many aspects of carpentry and joinery including:

A brief course overview of topics covered in the 10 days:

  • Build a stud partition wall with a doorway
  • Hang a door including fitting of locks
  • Fitting of skirting and moldings with external and internal corners
  • Scribing joints to fit moldings and skirting
  • Site carpentry operations included in second fixings
  • Resources required to fix moldings
  • Fixing moldings
  • Terms used in partitioning
  • Resources required to carry out partitioning
  • Produce and assemble studwork partition
  • Variety of tools used and explained in carpentry and joinery

To book the course we require a £200 deposit. The balance of £700 is then due on the first day of your course.

10 day Intensive Carpentry and Joinery Course £900 inc vat.

For an additional £300 (which can be decided on your third day of the course) you can upgrade to the NOCN Cskills Level 1 Certificate in Carpentry & Joinery.

 

For more information please contact the YTA Team on 01274682199. We are open form Monday to Friday 8:30am to 5pm. Courses are running every week.

YTA Training And Assessment Ltd, Unit 12a Factory St, Bradford, BD4 9NW

By

Fantastic 5 star multiple course review for YTA

A fantastic 5 star multiple course review for YTA on Google has been received following the completion of several YTA Training courses. Tiling, carpentry & joinery, plumbing, kitchen fitting and plastering courses completed by Anthony Nolan – an Electrician form Wales.

Having looked at various training providers I decided to try YTA, I have an electrical background and my objective was/is to be able to save money by renovating my own property and fit my own kitchen. That may be ambitious as I did not have experience of joinery, tilling, plumbing, or kitchen fitting, (although I had done some ‘plastering’ before) I spoke to Graham on the phone and we discussed a realistic development plan. With YTA, I did the 5 day joinery course, the 5 day plumbing course, a 2 day wall tiling course (specific to kitchen tilling) and a 2 day plastering skimming course ( with a specific practice session to skim over textured surfaces) and I recently completed the 5 day kitchen fitting course. As I am 57 years old and have worked in the construction industry I feel I can offer some advice to people that may be considering learning some construction skills. The instructors at YTA are all master tradesmen with decades of experience within each of their own areas of expertise, Lawrence carpentry, kitchens. Lyndon plumbing, electrical, Dave plastering, tilling. Plus Graham has an extensive plumbing background they were all very easy to get on with, bags of patience and are always willing to impart their knowledge. The courses are well structured to ensure progression and confidence. I believe courses offer excellent value for money and a great investment for people considering changing their careers or widening their income opportunities, with the option to attain valuable recognised qualifications if required. The facilities are excellent, easy to get to with adequate safe free parking, I travelled from N Wales and stayed in affordable (starting at £20 per night) farm house accommodation, within easy walking distance of YTA. During training time coffee, tea, decent biscuits are on tap throughout. For lunch break (45mins) there is a fridge and microwave cutlery and crockery available, plus close by plenty of options such as subway, MacDonalds, sandwich shops, Starbucks, personally I opted for the Fish and Chip shop just around the corner. According to Graham it is highly rated, especially by non local people!!! To finish this review, all I will say is, I was impressed, the other people doing the course whilst I was there were also happy and I believe you would be too. Thank you

Wow! What a fantastic 5 star review Anthony. Thank you. You certainly have worked your way around the training centre on a few different courses and we’ve all enjoyed having you with us. Glad you enjoyed those fish and chips too! Thanks once agin for such a superb review.


If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

 

By

July and August photos taken around the training centre

A small selection of photos taken throughout July and August 2019 around the YTA training centre.

 

We’ve had a busy summer at YTA with courses and NVQ’s running in all trades. Courses running at YTA Training and Assessment were plumbing, plastering, tiling, carpentry & joinery, kitchen fitting and bricklaying.

Plumbing in a radiator system
Plastering course
Learn to plumb a radiator system in
Tiling a kitchen
Silicone sealant tool
Learning carpentry skills
Finished tiled kitchen
Learning plastering
Learn plumbing
Plastering skills
Chiseling skills
Fitting a kitchen worktop
Plastering a ceiling
Skim a wall with plaster
Domestic hot water system
Tiling a diamond feature
Levelling up kitchen base units
Masking up for silicone sealing / sealant around the bath
Learning plastering
Plumbing in radiators
Joinery hand tool skills
Building a stud partition
Plastering a wall
Plastering demonstration
Tiling and grouting a kitchen
Tiling a wetroom floor.
Plastering a wall
Using a worktop router jig
Tiling a kitchen
Building a stud partition
Plumbing in a bathroom
Using a router for the worktop joint
Skimming a wall with plaster
weekend plastering course
Learning how to plaster
Learning bricklaying
Polishing off grout from tiles
Fitting doors
Fitting door hinges
Tiling kitchens and bathrooms
How to use a pipe bender
Setting up kitchen worktop router
Tiling a kitchen and cutting around plugs and cupboards
Plastering and skimming skills
Carpentry and joinery skills
Pipe bending to hot water cylinder
Marking out and fitting architrave
Skimming a ceiling
Domestic hot water system
Fitting doors
Tiling a bathroom
Fitting a hob on kitchen fitting course
Chiseling out for doors locks
Fitting plastering window trims
Tiling a kitchen
Preparing pipes for soldering
Fitting door handles, locks and latches
Flow and return pipes for radiators
First fix hot and cold water supply to bathroom
Making a gate as a project
Plumbing in hot water cylinder
Fitting shower pump to gravity fed system
Tiling corner of bathroom
Completed kitchen fitting course

 

If you would like to view reviews of YTA Training and Assessment then you can find them at reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

Great YTA Kitchen Fitting Course Review

Another great review once again following the completion of a YTA Training and Assessment 5 day kitchen fitting course.

Craig MacGarvie – 5 Star Kitchen Fitting Course Review

I recently undertook a kitchen fitting course with Lawrence Booth. The course was excellent and I learned a lot. Lawrence was also a great teacher and talked me through each step. I will be back to do the plumbing course at some point! Thanks again.

 

Thank you Craig for the fantastic review following the 5 day course. Lawrence is a fantastic teacher who loves to share his extensive knowledge on kitchen fitting, carpentry & joinery. We look forward to seeing you back with us at YTA for the plumbing course Craig.

On the 5 day intensive kitchen fitting course you will learn how to design a kitchen to the room provided and what types of cupboards and units are available to suit a variety of designs to suit a customers specification. Base units will need to be levelled on a and planned to a design along with hanging the wall units and fitting the extractor hood. You will use professional kitchen fitting tools form jig saws, circular saws and routers. You will be shown every aspect of setting up each tool along with handy tips along the way on how to use the tools for different materials.

 

This review and more genuine YTA reviews can be found on reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

A busy June at YTA! A selection of photos taken last month.

June was another busy month at YTA, a few photos taken around the training centre are below:

Courses on offer at YTA are:

Remember our 5 star independent reviews can be found by clicking the reviews badge below:

If you would like to book a course or look around the centre we have an open door policy and you can visit YTA Training anytime without an appointment between 8:30am and 5pm Monday to Friday.

Contact today on 01274682199

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire, BD4 9NW