YTA Training

Construction course

By

5 Star Selfie!

A customer selfie and another fantastic 5 star review for YTA!

Had the best experience on the plumbing course, this is coming from a man who hasn’t attended a course in 20 years or so, so I was very nervous… Had the best tutors Graham & Lyndon who made the whole experience both enjoyable and very informative at the same time.. I would recommend this place to anyone wanting to step out of their comfort zone and change direction in life I’ve learned so much these last 2 weeks thanks to all involved x

Craig Self – 10 day Level 1 Award in Plumbing. March 2020

Craig Self Selfie
From left to right. Lyndon (Plumbing Tutor), Tom & Craig (both attended 10 day level 1 plumbing course)
Craig Self selfie review of plumbing course
Craig Self review of plumbing course

Thank you for such a lovely review of our 10 day level 1 plumbing course Craig. It was a pleasure to teach you.

 

More reviews for YTA can be found at www.reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

We are open for business

We are open for business and our courses are still running every week. Our training centre is a large 6500 sq foot, high ceiling well ventilated area with individual training bays AND tools per person. We have latex gloves and masks to wear if required along with hand-wash and cleaning wipes and we only teach small class numbers on average 5 per class.

All hands-on practical training out in the centre learning. Here’s a selection of photos taken this week and last week from the plumbing, tiling, carpentry and plastering courses.

If on the Government advice, businesses like ours are asked to close, we can re-schedule courses for a later date. With a little help and goodwill we will all get through this, we’ll support you, we ask you support us.

We do have a policy if you cant attend due to coronavirus which can be found here. 

 

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary we are open for business Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

Email: info@ytatraining.com

YTA and our courses can be found at www.reviews.co.uk

YTA reviews

By

Book with confidence – COVID-19

Book a course with confidence – COVID-19

We are still open for business as usual but we are closely following advice from the government in keeping you safe.

If you book a course (pay a deposit / full payment) and are then unable to attend by the time your course start date comes around due to the coronavirus (COVID-19) then we will re-schedule your course for a later date in the year with no loss of your deposit/full payment..

These coming weeks will be a very worrying time for all businesses country wide as general footfall may decrease and we hope you will support us through this time.

Here’s what we will do:

  • Re-schedule any course or courses if you are unable to attend due to coronavirus without losing your deposit or full payment.
  • We have antibacterial hand-wash to use as frequently as you like
  • Everyone works/trains in their own training bays and do not share hand tools
  • We have disposable latex gloves around the training centre for everyone to use
  • All equipment and tools are cleaned down with antibacterial wipes
  • We will keep the total number of students and staff within our 6500 sq ft construction training centre to below 25 people.

I hope the above will help you book a course with confidence and together we can take each day as it comes.

If you have coronavirus (COVID-19) symptoms, the NHS link is HERE.

 

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, BD4 9NW

Tel: 01274682199

By

September & October course photos at YTA

September and October course photos at YTA , just a small selection but showing what we get up to on the courses. Bricklaying, tiling, plastering, plumbing, kitchen fitting, carpentry & joinery. We also did electrics too! We ran the Domestic Electrical Installer course which got some excellent feedback, we are next running the next DEI course in February 2020. Course photos are below:

As usual our reviews can be found at www.reviews.co.uk/YTA

 

 

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

July and August photos taken around the training centre

A small selection of photos taken throughout July and August 2019 around the YTA training centre.

 

We’ve had a busy summer at YTA with courses and NVQ’s running in all trades. Courses running at YTA Training and Assessment were plumbing, plastering, tiling, carpentry & joinery, kitchen fitting and bricklaying.

Plumbing in a radiator system
Plastering course
Learn to plumb a radiator system in
Tiling a kitchen
Silicone sealant tool
Learning carpentry skills
Finished tiled kitchen
Learning plastering
Learn plumbing
Plastering skills
Chiseling skills
Fitting a kitchen worktop
Plastering a ceiling
Skim a wall with plaster
Domestic hot water system
Tiling a diamond feature
Levelling up kitchen base units
Masking up for silicone sealing / sealant around the bath
Learning plastering
Plumbing in radiators
Joinery hand tool skills
Building a stud partition
Plastering a wall
Plastering demonstration
Tiling and grouting a kitchen
Tiling a wetroom floor.
Plastering a wall
Using a worktop router jig
Tiling a kitchen
Building a stud partition
Plumbing in a bathroom
Using a router for the worktop joint
Skimming a wall with plaster
weekend plastering course
Learning how to plaster
Learning bricklaying
Polishing off grout from tiles
Fitting doors
Fitting door hinges
Tiling kitchens and bathrooms
How to use a pipe bender
Setting up kitchen worktop router
Tiling a kitchen and cutting around plugs and cupboards
Plastering and skimming skills
Carpentry and joinery skills
Pipe bending to hot water cylinder
Marking out and fitting architrave
Skimming a ceiling
Domestic hot water system
Fitting doors
Tiling a bathroom
Fitting a hob on kitchen fitting course
Chiseling out for doors locks
Fitting plastering window trims
Tiling a kitchen
Preparing pipes for soldering
Fitting door handles, locks and latches
Flow and return pipes for radiators
First fix hot and cold water supply to bathroom
Making a gate as a project
Plumbing in hot water cylinder
Fitting shower pump to gravity fed system
Tiling corner of bathroom
Completed kitchen fitting course

 

If you would like to view reviews of YTA Training and Assessment then you can find them at reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

5 Star YTA Review – Level 1 Carpentry and Joinery Course

Another 5 star YTA review for our 10 day Cskills level 1 Certificate in Carpentry and Joinery course.  Please read below:

I did the 10 day carpentry and joinery course and I can recommend it. There was lots learnt over the 2 weeks and it is a good starter course for access to the industry. Relaxed feel to the training centre and a good, knowledgeable instructor.

Thank you Jamie for a great 5 star review. For more reviews please visit reviews.co.uk

Lawrence who teaches the carpentry and joinery courses has over 35 years experience in the trade and we only ever have 4 students on the carpentry and joinery courses to ensure you will get the most out of all our courses when attending YTA. The courses run every week so you are never far away from accessing a course and learn a trade. The Cskills level 1 courses are nationally recognised qualifications and recognised within the the industry. The Cskills level 1 certificate courses are also accepted as part of the CSCS card scheme to gain a RED CSCS card if a CSCS card test has already been achieved. Once you have three years experience behind you as a carpenter or joinery then you can then apply for the NVQ level 2 in Site Carpentry or the NVQ level 2 in Bench Joinery, both of which we offer here at YTA. If you would like to book a course or would like more information please do not hesitate to contac  YTA on 01274692199.

 

Facebook