YTA Training

YTA Training reviews

By

5 star reviews for 2 day plastering & 2 day worktop fitting

Two recent 5 star reviews following the completion of the 2 day plastering course and 2 day worktop fitting course.

Tim Falkner – 2 day plastering skimming course

I did the 2 day skimming course. By the first day had skimmed a wall and ceiling. Dave the instructor was very easy to work with teaching me the right techniques to skim. Highly recommend

Anonymous – 2 day worktop fitting course

I have just recently done the 2 day kitchen worktop course and I must say the guy Laurence who was my tutor was excellent he was looking after me and several joiners all at once . But I came with with what I needed and would highly recommend .

 

2 day plastering and worktop fitting course reviews
2 day plastering and worktop fitting course reviews

 

Course Descriptions:

The 2 day Plastering Course is £180 including vat and available most weeks on any 2 consecutive days. It will be 2 days of solid graft with 100% focus on achieving a smooth finish plastered wall. There’ll be no business start up or peripherals just all day mixing and plastering.

The aim of the 2 day worktop course will be to fit a worktop professionally. The course is £250 and you will use a router and worktop jig to create the worktop ‘masons mitre’ fitment into a corner area. You will also cut out for a kitchen sink and fit the kitchen sink.

  • You will use tools such as:
  • Router
  • Worktop Jig
  • Circular saw
  • Jigsaw
  • Square
  • Clamps
  • And other joiners tools to create a professional finish.

You will use professional kitchen fitting tools form jig saws, circular saws and routers. You will be shown every aspect of setting up each tool along with handy tips along the way on how to use the tools for different materials.

 

To book on the next available 2 day plastering course or 2 day worktop course you can either check the available dates on the website or call the centre on 01274682199 to book. YTA is based in Bradford, West Yorkshire and is not too far from Leeds. We are ideally located  near to the M62 motorway Junction 26.

YTA Training and Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, BD4 9NW, West Yorkshire

Tel: 01274682199

By

Carpentry & Joinery course review at YTA – Philip Porter

”I would definitely recommend” is what Philip Porter had to say following the completion of the 10 day carpentry and joinery course. Please see below the carpentry and joinery course review at YTA.

I attended the 10 day joinery course in October 19. The course was well presented with all the materials and tools available. Lawrence, the teacher was always there for you and as the classes were small he could spend plenty of time with each student. He explained and demonstrated clearly and you could tell he was a master craftsman. There was tea, coffee and biscuits available all day. I feel confident taking my skills out on to site now. I would definitely recommend and I’ll hopefully be doing other courses in time.

Thank you for such a great review Philip of your time at YTA whilst completing the 10 day carpentry and joinery course. Much appreciated.

Thanks again.
From the YTA Team

 

YTA Carpentry & Joinery course review by Philip Porter - Oct 19
YTA Carpentry & Joinery course review by Philip Porter – Oct 19

To read more reviews please follow this LINK.

The 10 day intensive carpentry and joinery course is ideal if you are wanting to start a career in carpentry & joinery and eventually move on to gain your NVQ level 2 in Site Carpentry. No previous experience in carpentry is necessary.

Throughout the course you will cover many aspects of carpentry and joinery including:

A brief course overview of topics covered in the 10 days:

  • Build a stud partition wall with a doorway
  • Hang a door including fitting of locks
  • Fitting of skirting and moldings with external and internal corners
  • Scribing joints to fit moldings and skirting
  • Site carpentry operations included in second fixings
  • Resources required to fix moldings
  • Fixing moldings
  • Terms used in partitioning
  • Resources required to carry out partitioning
  • Produce and assemble studwork partition
  • Variety of tools used and explained in carpentry and joinery

To book the course we require a £200 deposit. The balance of £700 is then due on the first day of your course.

10 day Intensive Carpentry and Joinery Course £900 inc vat.

For an additional £300 (which can be decided on your third day of the course) you can upgrade to the NOCN Cskills Level 1 Certificate in Carpentry & Joinery.

 

For more information please contact the YTA Team on 01274682199. We are open form Monday to Friday 8:30am to 5pm. Courses are running every week.

YTA Training And Assessment Ltd, Unit 12a Factory St, Bradford, BD4 9NW

By

Kitchen worktop course review

Another great review following the completion of the kitchen worktop course.

Really great little course. Gave me the confidence and built on my existing skills. Just what I needed.

Thank you for the 5 star review Chris. Very much appreciated.

The aim of the 2 day worktop course will be to fit a worktop professionally. You will use a router and worktop jig to create the worktop ‘masons mitre’ fitment into a corner area. You will also cut out for a kitchen sink and fit the kitchen sink.

To book on the next available worktop course you can either check the available dates on the website or call the centre on 01274682199 to book.

 

YTA Training and Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

YTA 1 day Plumbing Course Review

A new 5 star recent review following the completion of the YTA 1 day plumbing course.

I really enjoyed my day plumbing! I went into it with a general fear of plumbing, but I couldn’t believe how much we learnt – working in copper, plastic, solder. The tuition was brilliant – structured, approachable and informative. I’m going to try to book on for more!

Many thanks for the prompt review following the completion of the 1 day plumbing course today Lindsay. Another 5 star YTA review! Very much appreciated. I’m glad you enjoyed the course and we look forward to seeing you on the more courses.

During the 1 day plumbing taster course you will cover the below topics:

  • Use compression joints, end feed (soldering joints) and pipe bending techniques.
  • Work with copper and plastic pipe
  • Fit kitchen sink taps and waste
  • Plumb in a kitchen sink and test up to full working pressure

The 1 day plumbing taster course can be suited to your requirements, if you would just like to ‘have a go’ at plumbing and see how you get on then we can devise a taster day. You can plumb in a kitchen sink or work with pipework and use professional tools and equipment. Spend a day at YTA on the 1 day plumbing taster course and get to grips with learning basic pipefitting skills to plumbing in a small project such as a radiator or a kitchen sink.

To book on the next available 1 day plumbing course at YTA please call the centre on 01274682199.

 

YTA Training and Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

 

 

By

2 day kitchen worktop course review

Another 5 star review following the completion of the YTA 2 day kitchen worktop course.

My names Paul Proudman, I am so glad I chose YTA Training to do a 2 day worktop course. A really well planned and thought out course. So relaxed and great trainers who made me feel so welcome. I am definitely booking onto other courses. I couldn’t recommend them highly enough.

Thank you for the great 5 star review Paul. Very much appreciated and we look forward to seeing you on the other courses at YTA in the future.

The aim of the 2 day worktop course will be to fit a worktop professionally. You will use a router and worktop jig to create the worktop ‘masons mitre’ fitment into a corner area. You will also cut out for a kitchen sink and fit the kitchen sink.

To book on the next available worktop course you can either check the available dates on the website or call the centre on 01274682199 to book.

 

YTA Training and Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

 

By

Fantastic 5 star multiple course review for YTA

A fantastic 5 star multiple course review for YTA on Google has been received following the completion of several YTA Training courses. Tiling, carpentry & joinery, plumbing, kitchen fitting and plastering courses completed by Anthony Nolan – an Electrician form Wales.

Having looked at various training providers I decided to try YTA, I have an electrical background and my objective was/is to be able to save money by renovating my own property and fit my own kitchen. That may be ambitious as I did not have experience of joinery, tilling, plumbing, or kitchen fitting, (although I had done some ‘plastering’ before) I spoke to Graham on the phone and we discussed a realistic development plan. With YTA, I did the 5 day joinery course, the 5 day plumbing course, a 2 day wall tiling course (specific to kitchen tilling) and a 2 day plastering skimming course ( with a specific practice session to skim over textured surfaces) and I recently completed the 5 day kitchen fitting course. As I am 57 years old and have worked in the construction industry I feel I can offer some advice to people that may be considering learning some construction skills. The instructors at YTA are all master tradesmen with decades of experience within each of their own areas of expertise, Lawrence carpentry, kitchens. Lyndon plumbing, electrical, Dave plastering, tilling. Plus Graham has an extensive plumbing background they were all very easy to get on with, bags of patience and are always willing to impart their knowledge. The courses are well structured to ensure progression and confidence. I believe courses offer excellent value for money and a great investment for people considering changing their careers or widening their income opportunities, with the option to attain valuable recognised qualifications if required. The facilities are excellent, easy to get to with adequate safe free parking, I travelled from N Wales and stayed in affordable (starting at £20 per night) farm house accommodation, within easy walking distance of YTA. During training time coffee, tea, decent biscuits are on tap throughout. For lunch break (45mins) there is a fridge and microwave cutlery and crockery available, plus close by plenty of options such as subway, MacDonalds, sandwich shops, Starbucks, personally I opted for the Fish and Chip shop just around the corner. According to Graham it is highly rated, especially by non local people!!! To finish this review, all I will say is, I was impressed, the other people doing the course whilst I was there were also happy and I believe you would be too. Thank you

Wow! What a fantastic 5 star review Anthony. Thank you. You certainly have worked your way around the training centre on a few different courses and we’ve all enjoyed having you with us. Glad you enjoyed those fish and chips too! Thanks once agin for such a superb review.


If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199