YTA Training

Worktop fitting course

By

July and August photos taken around the training centre

A small selection of photos taken throughout July and August 2019 around the YTA training centre.

 

We’ve had a busy summer at YTA with courses and NVQ’s running in all trades. Courses running at YTA Training and Assessment were plumbing, plastering, tiling, carpentry & joinery, kitchen fitting and bricklaying.

Plumbing in a radiator system
Plastering course
Learn to plumb a radiator system in
Tiling a kitchen
Silicone sealant tool
Learning carpentry skills
Finished tiled kitchen
Learning plastering
Learn plumbing
Plastering skills
Chiseling skills
Fitting a kitchen worktop
Plastering a ceiling
Skim a wall with plaster
Domestic hot water system
Tiling a diamond feature
Levelling up kitchen base units
Masking up for silicone sealing / sealant around the bath
Learning plastering
Plumbing in radiators
Joinery hand tool skills
Building a stud partition
Plastering a wall
Plastering demonstration
Tiling and grouting a kitchen
Tiling a wetroom floor.
Plastering a wall
Using a worktop router jig
Tiling a kitchen
Building a stud partition
Plumbing in a bathroom
Using a router for the worktop joint
Skimming a wall with plaster
weekend plastering course
Learning how to plaster
Learning bricklaying
Polishing off grout from tiles
Fitting doors
Fitting door hinges
Tiling kitchens and bathrooms
How to use a pipe bender
Setting up kitchen worktop router
Tiling a kitchen and cutting around plugs and cupboards
Plastering and skimming skills
Carpentry and joinery skills
Pipe bending to hot water cylinder
Marking out and fitting architrave
Skimming a ceiling
Domestic hot water system
Fitting doors
Tiling a bathroom
Fitting a hob on kitchen fitting course
Chiseling out for doors locks
Fitting plastering window trims
Tiling a kitchen
Preparing pipes for soldering
Fitting door handles, locks and latches
Flow and return pipes for radiators
First fix hot and cold water supply to bathroom
Making a gate as a project
Plumbing in hot water cylinder
Fitting shower pump to gravity fed system
Tiling corner of bathroom
Completed kitchen fitting course

 

If you would like to view reviews of YTA Training and Assessment then you can find them at reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

YTA Worktop fitting course review

A new 5 star review has been left on google reviews following the completion of the YTA worktop fitting course.

Worktop fitting training was just what I was looking for to refine my skills.

Learn at own pace and enjoyable

The review was left on Google Reviews.

The aim of the 2 day worktop course will be to fit a worktop professionally. You will use a router and worktop jig to create the worktop ‘masons mitre’ fitment into a corner area. You will also cut out for a kitchen sink and fit the kitchen sink.

  • You will use tools such as:
  • Router
  • Worktop Jig
  • Circular saw
  • Jigsaw
  • Square
  • Clamps
  • And other joiners tools to create a professional finish.

You will use professional kitchen fitting tools form jig saws, circular saws and routers. You will be shown every aspect of setting up each tool along with handy tips along the way on how to use the tools for different materials.

Check out our time-lapse worktop router video below.

More reviews for YTA and our courses can be found at www.reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

Great YTA Kitchen Fitting Course Review

Another great review once again following the completion of a YTA Training and Assessment 5 day kitchen fitting course.

Craig MacGarvie – 5 Star Kitchen Fitting Course Review

I recently undertook a kitchen fitting course with Lawrence Booth. The course was excellent and I learned a lot. Lawrence was also a great teacher and talked me through each step. I will be back to do the plumbing course at some point! Thanks again.

 

Thank you Craig for the fantastic review following the 5 day course. Lawrence is a fantastic teacher who loves to share his extensive knowledge on kitchen fitting, carpentry & joinery. We look forward to seeing you back with us at YTA for the plumbing course Craig.

On the 5 day intensive kitchen fitting course you will learn how to design a kitchen to the room provided and what types of cupboards and units are available to suit a variety of designs to suit a customers specification. Base units will need to be levelled on a and planned to a design along with hanging the wall units and fitting the extractor hood. You will use professional kitchen fitting tools form jig saws, circular saws and routers. You will be shown every aspect of setting up each tool along with handy tips along the way on how to use the tools for different materials.

 

This review and more genuine YTA reviews can be found on reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

A busy June at YTA! A selection of photos taken last month.

June was another busy month at YTA, a few photos taken around the training centre are below:

Courses on offer at YTA are:

Remember our 5 star independent reviews can be found by clicking the reviews badge below:

If you would like to book a course or look around the centre we have an open door policy and you can visit YTA Training anytime without an appointment between 8:30am and 5pm Monday to Friday.

Contact today on 01274682199

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire, BD4 9NW

 

By

More 5 star reviews of YTA Training!

At YTA we love hearing your your reviews and we’ve just received two more fantastic ones, keep them coming in!

Chris Highley – Completed 10 day tiling, 5 day plumbing and 5 day plastering courses.

Absolute pleasure to work with. I have sat the full 10 day tiling course follows by a 5day plumbing course and also a 5 day plastering course. The tutors are all down to earth and easy to get along with, they make sure to keep assisting if and when required, the skills you’ll learn are more than just basic necessities but more so the skills, tips and tricks that only years of experience can bring. Everyone is more than welcome to explain queries in depth. I’m more than looking forward to return and complete the kitchen fitting course next. Can not recommended YTA as a whole enough!!

YTA: Many thanks for such a lovely 5 star review Chris. We look forward to see on the Kitchen Fitting course.

 

Tony Pemberton – Completed level 1 Award in Plumbing 10 day course.

Great course content. Great instructors. Nice relaxed learning environment. Lyndon, my instructor, pushed me enough to challenge me but not too much as to overwhelm me. I feel confident I can put into practice what I was taught. Would recommend this training centre to anyone I know. Thoroughly enjoyed my time here.

YTA: Thank you for a great 5 star review Tony. Glad you enjoyed your time training with us on the plumbing course.

 

At YTA Training and Assessment Ltd we use www.reviews.co.uk. Reviews.co.uk is a Google Licensed Review Partner, trusted with authentic customer feedback

At YTA we offer a range of courses both non-accredited and accredited. Courses range from 1 day taster sessions to 10 day level 1 certificates. We also offer NVQ level 2 and NVQ level 3 assessments.

What courses are on offer at YTA:

If you would like more information or would like to book a course with YTA after reading our reviews then please contact the training centre on 01274682199 alternatively email info@ytatraining.com

 

 

By

March photos taken around the YTA training centre

A small selection from another busy month. All courses have been running, bricklaying, plumbing, tiling, plastering, kitchen fitting, carpentry & joinery.

For more information on our fast track intensive courses please follow the links the the specific course pages above.

YTA runs construction courses every week and we only have small student to teacher ratios with an average of 5 to 1.

To book a course with YTA you can either book and pay using Paypal on the website or call the centre on 01274682199 anytime Monday to Friday.