YTA Training

Graham Binns

By

We are ready to open!

We have been working extremely hard over the past few weeks to prepare for re-opening following the lockdown and we are now ready to open for YTA courses on Monday 1st June.

Please take a look at the gallery below to see what we have put in place:

  • Hand sanitiser stations in each department,
  • Yellow dots on the floor 2m apart,
  • Perspex between training bays where possible
  • Face-masks to be handed out

We have some ground rules for attending which can be found on our COVID-19 page which must be followed to help keep all staff and students safe.

We are not sure how long we will need these rules and procedures in place but I feel it is a good way of trying to keep everybody safe.  We will expect all students and staff to adhere to the above measures. Safety in these unprecedented times is our top priority.

It will feel a little different at first whilst we all get used to the new social distancing measures and how we can practice this in a construction training centre but please bear with us as we are all new to this way of working/ teaching/ assessing.

 

Perspex between plumbing training bays
Perspex between carpentry & joinery bays and yellow dots 2m spacing on floor
2m yellow floor dots around the training centre
2m yellow floor dots around the training centre
2m yellow floor dots around the training centre
2m yellow floor dots around the training centre
2m yellow floor dots around the training centre
Hand sanitiser and perspex between plumbing training bays
Perspex between plumbing training bays
Perspex between plumbing training bays
Hand sanitiser by tiling and plastering course
Hand sanitiser by carpentry and bricklaying course
Hand sanitiser by advanced plumbing course

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, BD4 9NW

Tel: 01274682199

 

By

Three successful Carpentry NVQ’s today

We had three experienced carpenters successfully complete their Site Carpentry NVQ‘s today at YTA and we are happy to say that they all passed the 6 hour practical assessment. The Site Carpentry NVQ level 2 Diploma is gained through the EWPA (Experienced Worker Practical Assessment) if you have a minimum of 5 years experience working as Site Carpenter. We are so glad to say that we are off to a flying start following the lockdown period and all three achieved the 1 day NVQ level 2 practical assessment.

We have some new working practices in place which can be found on our COVID-19 PAGE and all went to plan, face-masks provided, social distancing and hand sanitiser stations around the centre all making the assessment process safe.

One of the three experienced carpenter completing his NVQ level 2 in site carpentry through EWPA today
One of the three experienced carpenter completing his NVQ level 2 in site carpentry through EWPA today

Are you an experienced Carpenter / Joiner of 5 or more years? then you can spend 1 day at our NOCN Cskills approved NVQ Centre in Yorkshire completing the wood occupations site carpentry NVQ level 2 EWPA (Experienced Worker Practical Assessment). We run this assessment on Saturday’s 7:30am until approx 4pm depending on your time. We run the assessment at our training centre in Bradford, West Yorkshire. The 1 day NVQ level 2 through EWPA costs £900 including vat, (£750 excl vat).

Successful Carpentry NVQ
Two out of the three experienced carpenters completing their NVQ level 2 in site carpentry through EWPA today

How do we assess during COVID-19 and keep social distancing

We have a very large assessment centre (6500 sq foot) and the EWPA requires the candidate to work on their own in a dedicated assessment area for an allocated amount of time to complete the practical assessment (between 6 and 9 hours depending on which trade). We can easily distance a maximum of 3 assessment areas within the centre 6m apart from each other. The assessor will assess at distance and when required at the end of the assessment, ask you to stand to one side so he can measure and mark your practical assessment.  So the carpentry NVQ level 2 is still running but with no more than 3 candidates per time in the building.

We really can get you your NVQ quickly

What if you need to be earning a wage again even before you’ve completed our carpentry EWPA route? Well, that’s not too much of a drama, either – you simply need to first secure your place and pay your deposit, so that we can get you registered. This will enable you to apply for and gain a temporary card lasting for a maximum of six months until you have completed the EWPA.

Don’t wait any longer to email the YTA team at info@ytatraining.com during COVID-19 lockdown and on 01274 682199, to book your place or to discuss how we can best serve your construction training / assessment requirements. YTA have been delivering successful Carpentry NVQ’s to experienced carpenters for 14 years now.

Successful Carpentry NVQ
Successfully completed carpentry NVQ at YTA

Well done to all three successful Carpentry NVQ’s candidates from the YTA team!

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

Email: info@ytatraining.com

YTA and our courses can be found at www.reviews.co.uk

YTA reviews

By

We are preparing to re-open

Covid-19 Important Update 14.5.2020

We are preparing to re-open but our top priority is keeping staff and students safe.

The YTA office will re-open on Monday 18th May and we will be actively contacting students whose courses have been affected over the past several weeks of closure due to coronavirus. We will be available to not only re-schedule courses but also take new course bookings. The office will be open 9am to 4:30pm. If you would rather call us then please do so on 01274682199.

Our plan is to start running the majority of our courses on Monday 1st June onwards.

What we will be doing in preparation to opening for students on 1st June is making sure we have the following in place:

  • 2m floor indicators around the centre where possible
  • hand sanitiser wall mounted dispensers around the training centre, office and the entrance/ exit to the building
  • hand wash facilities and disposable latex gloves provided throughout the centre as usual.
  • some training bays are only half height so we will be building clear perspex screens to a suitable height so once students are in their bays they can maintain social distance by way of a barrier/ screen/ wall.
  • depending on students numbers, break times may be staggered and we may not be able to accommodate every student a place to eat their lunch inside our centre whilst also maintaining 2m distances at all times. We will ask students to eat their lunch in their car/ van whilst we give students attending via public transport priority seating inside the building for their lunch
  • we will limit the amount of tool sharing as much as possible. Everyone will be provided with a set of tools to use for the duration of their course but some tools will need to be shared such as large tiles cutters, mixing drills and pressure testers. Wearing gloves whilst using these will be advised or use the hand sanitiser.
  • wearing a face-mask inside the building will be mandatory when a 2m social distance can not be maintained, for example:

– during some types of training such as 1 to 1 training

– small group lectures where the group may be stood near each other

– whilst walking through areas narrower than 2m where other students or staff may also walkthrough or past

This is to help keep everybody safe. The face-mask provided will be free of charge and a new one will be provided each day if required, this way everyone is able to wear a regulated good quality face-mask.

We are not sure how long we will need these rules and procedures in place but I feel it is a good way of trying to keep everybody safe. If you would like to cancel your course then we can refund your course fee or re-schedule for a time when the above rules can be relaxed. We will expect all students and staff to adhere to the above measures. Safety in these unprecedented times is our top priority.

It will feel a little different at first whilst we all get used to the new social distancing measures and how we can practice this in a construction training centre but please bear with us as we are all new to this way of working/ teaching/ assessing. Any further updates will be on the COVID-19 page.

 

Thank you. Stay safe.

Graham Binns

Director

E: info@ytatraining.com

 

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, BD4 9NW

Tel: 01274682199

By

Fantastic YTA Tiling & Plumbing Course Video Review

Another fantastic tiling and plumbing course video review from Alex Blair. Alex completed the 5 day tiling and 5 day plumbing courses in October 2019 and March 2020 and not only found the courses enjoyable but very beneficial, he has since booked onto 2 more courses, the 5 day advanced plumbing course and the 5 day plastering course.  The video is now live on YouTube so you can now watch and follow the YTA channel to receive all the latest YTA video reviews.

 

Thank you Alex for a Fantastic YTA video review

Whats Covered on the plumbing course:

The 5 day plumbing course will see you working with copper pipe and fixings, plumbing in a bathroom, a small 3 radiator system including thermostatic radiator valves, understanding different heating systems, plumbing in a kitchen sink including waste pipes plus plenty of fault finding and repair work throughout the week.

Alex left a fantastic YTA video following fitting radiator valves on the 5 day plumbing course
Alex fitting radiator valves on the 5 day plumbing course

Whats Covered on the tiling course:

The 5 day tiling course will see you cover surface preparation, setting out and tiling a kitchen, bathroom and floor. You will tile around obstacles such as plugs, windows and shower pipes and complete each task by grouting and silicone sealing. You will work in your own bay for the course and look to create a professional finish.

Alex Tiling a bathroom on the 5 day tiling course
Alex Tiling a bathroom on the 5 day tiling course
Alex Tiling a kitchen on the 5 day tiling course
Alex Tiling a kitchen on the 5 day tiling course

We hope you enjoyed watching this fantastic YTA video review. The YTA Team.

YTA reviews

More YTA reviews can be found at www.reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

 

By

Carpentry NVQ still running

Our site carpentry EWPA option could give you a Level 2 qualification in next to no time

There are certain things that anyone who wishes to become a professional carpenter needs to possess; a sound knowledge of building and construction, considerable attention to detail, a good ability to work well with others, the ability to use, repair and maintain tools and machinery…One more thing that you will definitely require if you are to gain site work as a skilled worker, though, is the blue skilled worker CSCS card. And if you are to obtain that, you’ll need to have the right qualification under your belt. That qualification is an NVQ Level 2 in carpentry, and while various construction training providers up and down the UK give you the opportunity to earn this qualification, there are few that make it as pleasurable as we do here at YTA!

 

The renowned fast-track route for joiners with previous experience

‘EWPA’ is short for ‘Experienced Worker Practical Assessment’. The purpose of this particular NVQ route is to enable someone whois already experienced in their chosen trade to achieve a Level 2 qualification much more quickly than would be the case if they were completely ‘starting afresh’ with their training.

In keeping with our reputation as one of the UK’s premier construction training providers, YTA offers EWPA fast-track options to those wishing to earn qualifications in not only site carpentry, but also wall and floor tiling, bricklaying and plastering. Focusing specifically on the site carpentry EWPA route, though, as long as you have five or more years’ joinery experience and both you and our NVQ assessor are confident about your chances of passing, you will be entitled to book a one or two-day assessment with us. This time you spend at our training centre will allow us to evaluate your skills through a combination of professional discussion, witness testimonies and the practical assessment.

If you are happy to arrive at our premises for 7:30am, we will be able to complete the entire NVQ carpentry assessment for you in one day. When the day concludes, the assessor will inform you whether or not you have achieved, and if you have, your certificate will be sent to you within 14 days.

 

How do we assess during COVID-19 and keep social distancing

We have a very large assessment centre (6500 sq foot) that is currently closed for our usual 5 & 10 days training courses but we are still assessing for NVQ level 2 qualifications through EWPA (Experienced Worker Practical Assessments) at the weekends. The EWPA requires the candidate to work on their own in a dedicated assessment area for an allocated amount of time to complete the practical assessment (between 6 and 9 hours depending on which trade). We can easily distance a maximum of 3 assessment areas within the centre 6m apart from each other. The assessor will assess at distance and when required at the end of the assessment, ask you to stand to one side so he can measure and mark your practical assessment.  So the carpentry NVQ level 2 is still running but with no more than 3 candidates per time in the building.

If you would like to gain your NVQ through the EWPA route or would like more information the please email info@ytatraining.com and the assessor will give you a call back within 24 hours.

 

We really can quickly get you you NVQ quickly

What if you need to be earning a wage again even before you’ve completed our carpentry EWPA route? Well, that’s not too much of a drama, either – you simply need to first secure your place and pay your deposit, so that we can get you registered. This will enable you to apply for and gain a temporary card lasting for a maximum of six months until you have completed the EWPA.

Don’t wait any longer to email the YTA team at info@ytatraining.com during COVID-19 lockdown and on 01274 682199 once we are all back at work, to book your place or to discuss how we can best serve your construction training / assessment requirements.

Carpentry NVQ level 2 assessment back
Carpentry NVQ level 2 assessment back
Carpentry NVQ level 2 assessment front
Carpentry NVQ level 2 assessment front

 YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

Email: info@ytatraining.com

YTA and our courses can be found at www.reviews.co.uk

YTA reviews

 

By

Plumbing course video review by Josef Faddoul

YTA Plumbing course video review by Josef Faddoul.

Another great plumbing course video review is now available to watch on our YouTube channel! Josef Faddoul completed the 5 day plumbing course in February 2020 and was more than happy with the training and support he received throughout the plumbing course that he immediately booked more courses with YTA.

Whats Covered on the plumbing course:

The 5 day plumbing course will see you working with copper pipe and fixings, plumbing in a bathroom, a small 3 radiator system including thermostatic radiator valves, understanding different heating systems, plumbing in a kitchen sink including waste pipes plus plenty of fault finding and repair work throughout the week.

Thank you for such a great YTA plumbing course review Josef, looking forward to having you back at YTA to complete your other courses.

The YTA team.

YTA reviews

More YTA reviews can be found at www.reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199