YTA Training

YTA Training and Assessment

By

September & October course photos at YTA

September and October course photos at YTA , just a small selection but showing what we get up to on the courses. Bricklaying, tiling, plastering, plumbing, kitchen fitting, carpentry & joinery. We also did electrics too! We ran the Domestic Electrical Installer course which got some excellent feedback, we are next running the next DEI course in February 2020. Course photos are below:

As usual our reviews can be found at www.reviews.co.uk/YTA

 

 

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

5 star reviews for 2 day plastering & 2 day worktop fitting

Two recent 5 star reviews following the completion of the 2 day plastering course and 2 day worktop fitting course.

Tim Falkner – 2 day plastering skimming course

I did the 2 day skimming course. By the first day had skimmed a wall and ceiling. Dave the instructor was very easy to work with teaching me the right techniques to skim. Highly recommend

Anonymous – 2 day worktop fitting course

I have just recently done the 2 day kitchen worktop course and I must say the guy Laurence who was my tutor was excellent he was looking after me and several joiners all at once . But I came with with what I needed and would highly recommend .

 

2 day plastering and worktop fitting course reviews
2 day plastering and worktop fitting course reviews

 

Course Descriptions:

The 2 day Plastering Course is £180 including vat and available most weeks on any 2 consecutive days. It will be 2 days of solid graft with 100% focus on achieving a smooth finish plastered wall. There’ll be no business start up or peripherals just all day mixing and plastering.

The aim of the 2 day worktop course will be to fit a worktop professionally. The course is £250 and you will use a router and worktop jig to create the worktop ‘masons mitre’ fitment into a corner area. You will also cut out for a kitchen sink and fit the kitchen sink.

  • You will use tools such as:
  • Router
  • Worktop Jig
  • Circular saw
  • Jigsaw
  • Square
  • Clamps
  • And other joiners tools to create a professional finish.

You will use professional kitchen fitting tools form jig saws, circular saws and routers. You will be shown every aspect of setting up each tool along with handy tips along the way on how to use the tools for different materials.

 

To book on the next available 2 day plastering course or 2 day worktop course you can either check the available dates on the website or call the centre on 01274682199 to book. YTA is based in Bradford, West Yorkshire and is not too far from Leeds. We are ideally located  near to the M62 motorway Junction 26.

YTA Training and Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, BD4 9NW, West Yorkshire

Tel: 01274682199

By

Carpentry & Joinery course review at YTA – Philip Porter

”I would definitely recommend” is what Philip Porter had to say following the completion of the 10 day carpentry and joinery course. Please see below the carpentry and joinery course review at YTA.

I attended the 10 day joinery course in October 19. The course was well presented with all the materials and tools available. Lawrence, the teacher was always there for you and as the classes were small he could spend plenty of time with each student. He explained and demonstrated clearly and you could tell he was a master craftsman. There was tea, coffee and biscuits available all day. I feel confident taking my skills out on to site now. I would definitely recommend and I’ll hopefully be doing other courses in time.

Thank you for such a great review Philip of your time at YTA whilst completing the 10 day carpentry and joinery course. Much appreciated.

Thanks again.
From the YTA Team

 

YTA Carpentry & Joinery course review by Philip Porter - Oct 19
YTA Carpentry & Joinery course review by Philip Porter – Oct 19

To read more reviews please follow this LINK.

The 10 day intensive carpentry and joinery course is ideal if you are wanting to start a career in carpentry & joinery and eventually move on to gain your NVQ level 2 in Site Carpentry. No previous experience in carpentry is necessary.

Throughout the course you will cover many aspects of carpentry and joinery including:

A brief course overview of topics covered in the 10 days:

  • Build a stud partition wall with a doorway
  • Hang a door including fitting of locks
  • Fitting of skirting and moldings with external and internal corners
  • Scribing joints to fit moldings and skirting
  • Site carpentry operations included in second fixings
  • Resources required to fix moldings
  • Fixing moldings
  • Terms used in partitioning
  • Resources required to carry out partitioning
  • Produce and assemble studwork partition
  • Variety of tools used and explained in carpentry and joinery

To book the course we require a £200 deposit. The balance of £700 is then due on the first day of your course.

10 day Intensive Carpentry and Joinery Course £900 inc vat.

For an additional £300 (which can be decided on your third day of the course) you can upgrade to the NOCN Cskills Level 1 Certificate in Carpentry & Joinery.

 

For more information please contact the YTA Team on 01274682199. We are open form Monday to Friday 8:30am to 5pm. Courses are running every week.

YTA Training And Assessment Ltd, Unit 12a Factory St, Bradford, BD4 9NW

By

New Special Offers Now Available

We currently have 2 fantastic offers on that are running from October 2019 to 31st January 2020. We have a ex-student 10% off offer and a 4th week half price offer. Please be aware that if places fill up these offers will end before the 31st January.

For more details please see our TOP OFFER.

4th week half price offer!

Over the winter months of October to February we will be running our very popular 4th week half price offer. The offer is 4 weeks worth of training but the 4th week is charged at half price saving you at least £225. The 4 weeks worth of courses must be completed within 12 weeks from the first course starting. This offer includes undertaking our 5 day courses, 5 day advanced courses (second week courses) and 10 day courses. You do not have to complete the 4 weeks consecutively either, you can spread your weeks out over the 12 week period. Please be aware that places are limited and are on a first come basis.

How the offer works:

  1. Call the centre and discuss course dates and options
  2. Book suitable course dates and pay £400 deposit (£100 deposit per week/date booked) The deposit will be £500 if kitchen fitting is included.
  3. The remaining balances are then due on the first day of each course.

Typical example A: (more examples further down the page)

  1. Pay £400 deposit for 4 weeks of courses
  2. 1st week = 5 day tiling course (pay £350 balance)
  3. 2nd week = 1st 5 days of 10 day plastering course (pay £350 balance)
  4. 3rd week = 2nd 5 days of 10 day plastering course (pay £350 balance)
  5. 4th week = 5 day plumbing course (pay £125 balance)

Total cost = £1575 including vat (£1312.50 excluding vat) A saving of £225!

The offer above is just a typical example but you can choose any 5 day courses to fit the offer. You could even choose 4x 5 day courses in 4 different trades or even 2x 10 day courses and you will still make the same saving.  The 4th week must be completed within 12 weeks from the first course start date, if it is not then you will lose your 4th week deposit. Thats the offer!

If you would like to add on a qualification these are charged at extra costs. So the example above (Example A) could be made into Cskills level 1 certificate in plastering for £300 extra because you are just paying the additional qualification fees.

Courses available:

  • 5 day tiling course
  • 5 day advanced tiling course (second week of the 10 day course)
  • 5 day plastering course
  • 5 day advanced plastering course (second week of the 10 day course)
  • 5 day plumbing course
  • 5 day advanced plumbing course (second week of the 10 day course)
  • 5 day carpentry & joinery course
  • 5 day advanced carpentry & joinery course (second week of the 10 day course)
  • 5 day bricklaying course
  • 5 day advanced bricklaying course (second week of the 10 day course)
  • 5 day kitchen fitting course (Please note: The kitchen fitting course is £625 per week whereas all other 5 day courses are £450 per week. The course will still be offered in the deal but please bear in mind the extra cost for the kitchen fitting. We also take a £200 deposit instead of a £100 deposit for the kitchen fitting course.)

Typical example B:

  1. Pay £400 deposit for 4 weeks of courses
  2. 1st week = 5 day plastering course (pay £350 balance)
  3. 2nd week = 5 day tiling course (pay £350 balance)
  4. 3rd week = 5 day carpentry & joinery course (pay £350 balance)
  5. 4th week = 5 day plumbing course (pay £125 balance)

Total cost = £1575 including vat (£1312.50 excluding vat) A saving of £225! Usual cost without the offer = £1800

Typical example C: Including 1x Cskills level 1 Certificate.

  1. Pay £400 deposit for 4 weeks of courses
  2. 1st week = 1st week of 10 day level 1 plastering course (pay £650 balance to include £300 qualification fee)
  3. 2nd week = 2nd week of 10 day level 1 plastering course (pay £350 balance)
  4. 3rd week = 1st week of 10 day tiling course (pay £350 balance)
  5. 4th week = 2nd week of 10 day tiling course (pay £125 balance)

Total cost = £1875 including vat (£1562.50 excluding vat) A saving of £225! Usual cost without the offer = £1650

Typical example D: Including kitchen fitting

  1. Pay £500 deposit for 4 weeks of courses (we take £200 deposit for kitchen fitting)
  2. 1st week = 1st week of 10 day carpentry & joinery course (pay £350 balance
  3. 2nd week = 2nd week of 10 day carpentry & joinery course (pay £350 balance)
  4. 3rd week = 5 day tiling course (pay £350 balance)
  5. 4th week = 5 day kitchen fitting course (pay £112.50 balance)

Total cost = £1662.50 including vat (£1385.41 excluding vat) A saving of £312.50! Usual cost without the offer = £1975

 

BOLT ON QUALIFICATIONS

As shown in Example C above, you can undertake the 10 day courses within the offer and just pay the extra for the level 1 qualifications for that particular course. Those extra costs are shown below:

NOCN Cskills (Construction Skills) is the awarding body for the construction industry providing industry recognised and nationally recognised trade qualifications from level 1 up to NVQ level 2 and 3.

If you are looking to eventually gain your NVQ level 2 in the trade then the perfect way to start your career is to gain your level 1, then build up your experience before the NVQ level 2. For more information on this qualification process CLICK HERE.

Ex-Student 10% off offer

If you have previously completed any of our 5 or 10 day courses, wether it was several years ago or even just last week. You can book any of our other 5 or 10 day course at a discount rate with 10% off the total price. (The qualification cost can not be discounted)

Example A: 5 day tiling course usual price £450 – 10% off = New Total = £405. Saving £45!

Example B: 10 day level 1 wall & floor tiling course price (£900 + £200 for qualification) 10% off the £900 = £810 + £200 (qualification fee) = New Total = £1010. Saving £90!

Example C: 5 day kitchen fitting course price £625 – 10% off = New Total = £562.50. Saving £62.50!

This offer ends 31st January. The Electrical courses are not included in this offer. When places are filled, the offer will be withdrawn before the deadline date.

Terms: All the 4th week free courses must be completed within a 12 week timeframe from 1st week to 4th week. This offer can not be used in conjunction with any other offer. The offer is not available to block booking organisations but we will accept a 3 candidates from an organisation to share the offer.

If you would like some advice on which courses may suit you best please do not hesitate to contact the YTA team who will be happy to advise you. You can use the contact form or give the centre a call Monday to Friday 8:30am to 5pm.


Tel: 01274682199

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

BD4 9NW

By

YTA 1 day Plumbing Course Review

A new 5 star recent review following the completion of the YTA 1 day plumbing course.

I really enjoyed my day plumbing! I went into it with a general fear of plumbing, but I couldn’t believe how much we learnt – working in copper, plastic, solder. The tuition was brilliant – structured, approachable and informative. I’m going to try to book on for more!

Many thanks for the prompt review following the completion of the 1 day plumbing course today Lindsay. Another 5 star YTA review! Very much appreciated. I’m glad you enjoyed the course and we look forward to seeing you on the more courses.

During the 1 day plumbing taster course you will cover the below topics:

  • Use compression joints, end feed (soldering joints) and pipe bending techniques.
  • Work with copper and plastic pipe
  • Fit kitchen sink taps and waste
  • Plumb in a kitchen sink and test up to full working pressure

The 1 day plumbing taster course can be suited to your requirements, if you would just like to ‘have a go’ at plumbing and see how you get on then we can devise a taster day. You can plumb in a kitchen sink or work with pipework and use professional tools and equipment. Spend a day at YTA on the 1 day plumbing taster course and get to grips with learning basic pipefitting skills to plumbing in a small project such as a radiator or a kitchen sink.

To book on the next available 1 day plumbing course at YTA please call the centre on 01274682199.

 

YTA Training and Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

 

 

By

2 day kitchen worktop course review

Another 5 star review following the completion of the YTA 2 day kitchen worktop course.

My names Paul Proudman, I am so glad I chose YTA Training to do a 2 day worktop course. A really well planned and thought out course. So relaxed and great trainers who made me feel so welcome. I am definitely booking onto other courses. I couldn’t recommend them highly enough.

Thank you for the great 5 star review Paul. Very much appreciated and we look forward to seeing you on the other courses at YTA in the future.

The aim of the 2 day worktop course will be to fit a worktop professionally. You will use a router and worktop jig to create the worktop ‘masons mitre’ fitment into a corner area. You will also cut out for a kitchen sink and fit the kitchen sink.

To book on the next available worktop course you can either check the available dates on the website or call the centre on 01274682199 to book.

 

YTA Training and Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199