YTA Training

plumbing course

By

Excellent Multiple Courses YTA Review.

We have received an excellent multiple courses YTA review from an ex student after completing several courses. Nigel completed Tiling, Carpentry, Plumbing, Plastering, Bricklaying and Kitchen Fitting courses at YTA over several weeks and has since completed various projects including installing 3 bathrooms whilst renovating his properties as a landlord and is now completing his second kitchen installation. You can read his review of YTA and our tutors below:

Nigel Hammond YTA review

I attended a suite of YTA courses including Tiling, Carpentry, Plumbing, Plastering, Bricklaying and Kitchen Fitting. I was a novice, working in IT, with little more experience than the odd DIY job. I have used all the training as a landlord, renovating a few properties. I’ve installed 3 bathrooms (includes all appliances , tiling, and flooring), and I’m currently installing my 2nd kitchen (again involving plenty of plumbing, tiling, woodwork etc). As well as numerous other DIY tasks, around the place. I understand this would be a small fortune to pay tradespeople to do. I’ve done it myself, thanks to skills and confidence developed as a result of attending YTA courses, instructed by the excellent tutors Lorry, Dave, and Graham. I also gained a great deal of knowledge surrounded by industry trades people, also cross-training across disciplines. A very helpful perspective. I’ve plenty to learn in maintaining properties, but I think its helpful to get a good grounding in what is a multi-discipline/skill set of tasks. Many thanks to tutors and course colleagues.I recommend to anyone who wants to have a go and do a good job, and some might say, professional.

Thank you Nigel for an excellent 5 star multiple courses YTA review. It’s always lovely to see students put their training and skills to good use following the courses.

YTA reviews

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

Email: info@ytatraining.com

By

September & October course photos at YTA

September and October course photos at YTA , just a small selection but showing what we get up to on the courses. Bricklaying, tiling, plastering, plumbing, kitchen fitting, carpentry & joinery. We also did electrics too! We ran the Domestic Electrical Installer course which got some excellent feedback, we are next running the next DEI course in February 2020. Course photos are below:

As usual our reviews can be found at www.reviews.co.uk/YTA

 

 

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

New Special Offers Now Available

We currently have 2 fantastic offers on that are running from October 2019 to 31st January 2020. We have a ex-student 10% off offer and a 4th week half price offer. Please be aware that if places fill up these offers will end before the 31st January.

For more details please see our TOP OFFER.

4th week half price offer!

Over the winter months of October to February we will be running our very popular 4th week half price offer. The offer is 4 weeks worth of training but the 4th week is charged at half price saving you at least £225. The 4 weeks worth of courses must be completed within 12 weeks from the first course starting. This offer includes undertaking our 5 day courses, 5 day advanced courses (second week courses) and 10 day courses. You do not have to complete the 4 weeks consecutively either, you can spread your weeks out over the 12 week period. Please be aware that places are limited and are on a first come basis.

How the offer works:

  1. Call the centre and discuss course dates and options
  2. Book suitable course dates and pay £400 deposit (£100 deposit per week/date booked) The deposit will be £500 if kitchen fitting is included.
  3. The remaining balances are then due on the first day of each course.

Typical example A: (more examples further down the page)

  1. Pay £400 deposit for 4 weeks of courses
  2. 1st week = 5 day tiling course (pay £350 balance)
  3. 2nd week = 1st 5 days of 10 day plastering course (pay £350 balance)
  4. 3rd week = 2nd 5 days of 10 day plastering course (pay £350 balance)
  5. 4th week = 5 day plumbing course (pay £125 balance)

Total cost = £1575 including vat (£1312.50 excluding vat) A saving of £225!

The offer above is just a typical example but you can choose any 5 day courses to fit the offer. You could even choose 4x 5 day courses in 4 different trades or even 2x 10 day courses and you will still make the same saving.  The 4th week must be completed within 12 weeks from the first course start date, if it is not then you will lose your 4th week deposit. Thats the offer!

If you would like to add on a qualification these are charged at extra costs. So the example above (Example A) could be made into Cskills level 1 certificate in plastering for £300 extra because you are just paying the additional qualification fees.

Courses available:

  • 5 day tiling course
  • 5 day advanced tiling course (second week of the 10 day course)
  • 5 day plastering course
  • 5 day advanced plastering course (second week of the 10 day course)
  • 5 day plumbing course
  • 5 day advanced plumbing course (second week of the 10 day course)
  • 5 day carpentry & joinery course
  • 5 day advanced carpentry & joinery course (second week of the 10 day course)
  • 5 day bricklaying course
  • 5 day advanced bricklaying course (second week of the 10 day course)
  • 5 day kitchen fitting course (Please note: The kitchen fitting course is £625 per week whereas all other 5 day courses are £450 per week. The course will still be offered in the deal but please bear in mind the extra cost for the kitchen fitting. We also take a £200 deposit instead of a £100 deposit for the kitchen fitting course.)

Typical example B:

  1. Pay £400 deposit for 4 weeks of courses
  2. 1st week = 5 day plastering course (pay £350 balance)
  3. 2nd week = 5 day tiling course (pay £350 balance)
  4. 3rd week = 5 day carpentry & joinery course (pay £350 balance)
  5. 4th week = 5 day plumbing course (pay £125 balance)

Total cost = £1575 including vat (£1312.50 excluding vat) A saving of £225! Usual cost without the offer = £1800

Typical example C: Including 1x Cskills level 1 Certificate.

  1. Pay £400 deposit for 4 weeks of courses
  2. 1st week = 1st week of 10 day level 1 plastering course (pay £650 balance to include £300 qualification fee)
  3. 2nd week = 2nd week of 10 day level 1 plastering course (pay £350 balance)
  4. 3rd week = 1st week of 10 day tiling course (pay £350 balance)
  5. 4th week = 2nd week of 10 day tiling course (pay £125 balance)

Total cost = £1875 including vat (£1562.50 excluding vat) A saving of £225! Usual cost without the offer = £1650

Typical example D: Including kitchen fitting

  1. Pay £500 deposit for 4 weeks of courses (we take £200 deposit for kitchen fitting)
  2. 1st week = 1st week of 10 day carpentry & joinery course (pay £350 balance
  3. 2nd week = 2nd week of 10 day carpentry & joinery course (pay £350 balance)
  4. 3rd week = 5 day tiling course (pay £350 balance)
  5. 4th week = 5 day kitchen fitting course (pay £112.50 balance)

Total cost = £1662.50 including vat (£1385.41 excluding vat) A saving of £312.50! Usual cost without the offer = £1975

 

BOLT ON QUALIFICATIONS

As shown in Example C above, you can undertake the 10 day courses within the offer and just pay the extra for the level 1 qualifications for that particular course. Those extra costs are shown below:

NOCN Cskills (Construction Skills) is the awarding body for the construction industry providing industry recognised and nationally recognised trade qualifications from level 1 up to NVQ level 2 and 3.

If you are looking to eventually gain your NVQ level 2 in the trade then the perfect way to start your career is to gain your level 1, then build up your experience before the NVQ level 2. For more information on this qualification process CLICK HERE.

Ex-Student 10% off offer

If you have previously completed any of our 5 or 10 day courses, wether it was several years ago or even just last week. You can book any of our other 5 or 10 day course at a discount rate with 10% off the total price. (The qualification cost can not be discounted)

Example A: 5 day tiling course usual price £450 – 10% off = New Total = £405. Saving £45!

Example B: 10 day level 1 wall & floor tiling course price (£900 + £200 for qualification) 10% off the £900 = £810 + £200 (qualification fee) = New Total = £1010. Saving £90!

Example C: 5 day kitchen fitting course price £625 – 10% off = New Total = £562.50. Saving £62.50!

This offer ends 31st January. The Electrical courses are not included in this offer. When places are filled, the offer will be withdrawn before the deadline date.

Terms: All the 4th week free courses must be completed within a 12 week timeframe from 1st week to 4th week. This offer can not be used in conjunction with any other offer. The offer is not available to block booking organisations but we will accept a 3 candidates from an organisation to share the offer.

If you would like some advice on which courses may suit you best please do not hesitate to contact the YTA team who will be happy to advise you. You can use the contact form or give the centre a call Monday to Friday 8:30am to 5pm.


Tel: 01274682199

YTA Training And Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

BD4 9NW

By

YTA 1 day Plumbing Course Review

A new 5 star recent review following the completion of the YTA 1 day plumbing course.

I really enjoyed my day plumbing! I went into it with a general fear of plumbing, but I couldn’t believe how much we learnt – working in copper, plastic, solder. The tuition was brilliant – structured, approachable and informative. I’m going to try to book on for more!

Many thanks for the prompt review following the completion of the 1 day plumbing course today Lindsay. Another 5 star YTA review! Very much appreciated. I’m glad you enjoyed the course and we look forward to seeing you on the more courses.

During the 1 day plumbing taster course you will cover the below topics:

  • Use compression joints, end feed (soldering joints) and pipe bending techniques.
  • Work with copper and plastic pipe
  • Fit kitchen sink taps and waste
  • Plumb in a kitchen sink and test up to full working pressure

The 1 day plumbing taster course can be suited to your requirements, if you would just like to ‘have a go’ at plumbing and see how you get on then we can devise a taster day. You can plumb in a kitchen sink or work with pipework and use professional tools and equipment. Spend a day at YTA on the 1 day plumbing taster course and get to grips with learning basic pipefitting skills to plumbing in a small project such as a radiator or a kitchen sink.

To book on the next available 1 day plumbing course at YTA please call the centre on 01274682199.

 

YTA Training and Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

 

 

By

Fantastic 5 star multiple course review for YTA

A fantastic 5 star multiple course review for YTA on Google has been received following the completion of several YTA Training courses. Tiling, carpentry & joinery, plumbing, kitchen fitting and plastering courses completed by Anthony Nolan – an Electrician form Wales.

Having looked at various training providers I decided to try YTA, I have an electrical background and my objective was/is to be able to save money by renovating my own property and fit my own kitchen. That may be ambitious as I did not have experience of joinery, tilling, plumbing, or kitchen fitting, (although I had done some ‘plastering’ before) I spoke to Graham on the phone and we discussed a realistic development plan. With YTA, I did the 5 day joinery course, the 5 day plumbing course, a 2 day wall tiling course (specific to kitchen tilling) and a 2 day plastering skimming course ( with a specific practice session to skim over textured surfaces) and I recently completed the 5 day kitchen fitting course. As I am 57 years old and have worked in the construction industry I feel I can offer some advice to people that may be considering learning some construction skills. The instructors at YTA are all master tradesmen with decades of experience within each of their own areas of expertise, Lawrence carpentry, kitchens. Lyndon plumbing, electrical, Dave plastering, tilling. Plus Graham has an extensive plumbing background they were all very easy to get on with, bags of patience and are always willing to impart their knowledge. The courses are well structured to ensure progression and confidence. I believe courses offer excellent value for money and a great investment for people considering changing their careers or widening their income opportunities, with the option to attain valuable recognised qualifications if required. The facilities are excellent, easy to get to with adequate safe free parking, I travelled from N Wales and stayed in affordable (starting at £20 per night) farm house accommodation, within easy walking distance of YTA. During training time coffee, tea, decent biscuits are on tap throughout. For lunch break (45mins) there is a fridge and microwave cutlery and crockery available, plus close by plenty of options such as subway, MacDonalds, sandwich shops, Starbucks, personally I opted for the Fish and Chip shop just around the corner. According to Graham it is highly rated, especially by non local people!!! To finish this review, all I will say is, I was impressed, the other people doing the course whilst I was there were also happy and I believe you would be too. Thank you

Wow! What a fantastic 5 star review Anthony. Thank you. You certainly have worked your way around the training centre on a few different courses and we’ve all enjoyed having you with us. Glad you enjoyed those fish and chips too! Thanks once agin for such a superb review.


If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

 

By

July and August photos taken around the training centre

A small selection of photos taken throughout July and August 2019 around the YTA training centre.

 

We’ve had a busy summer at YTA with courses and NVQ’s running in all trades. Courses running at YTA Training and Assessment were plumbing, plastering, tiling, carpentry & joinery, kitchen fitting and bricklaying.

Plumbing in a radiator system
Plastering course
Learn to plumb a radiator system in
Tiling a kitchen
Silicone sealant tool
Learning carpentry skills
Finished tiled kitchen
Learning plastering
Learn plumbing
Plastering skills
Chiseling skills
Fitting a kitchen worktop
Plastering a ceiling
Skim a wall with plaster
Domestic hot water system
Tiling a diamond feature
Levelling up kitchen base units
Masking up for silicone sealing / sealant around the bath
Learning plastering
Plumbing in radiators
Joinery hand tool skills
Building a stud partition
Plastering a wall
Plastering demonstration
Tiling and grouting a kitchen
Tiling a wetroom floor.
Plastering a wall
Using a worktop router jig
Tiling a kitchen
Building a stud partition
Plumbing in a bathroom
Using a router for the worktop joint
Skimming a wall with plaster
weekend plastering course
Learning how to plaster
Learning bricklaying
Polishing off grout from tiles
Fitting doors
Fitting door hinges
Tiling kitchens and bathrooms
How to use a pipe bender
Setting up kitchen worktop router
Tiling a kitchen and cutting around plugs and cupboards
Plastering and skimming skills
Carpentry and joinery skills
Pipe bending to hot water cylinder
Marking out and fitting architrave
Skimming a ceiling
Domestic hot water system
Fitting doors
Tiling a bathroom
Fitting a hob on kitchen fitting course
Chiseling out for doors locks
Fitting plastering window trims
Tiling a kitchen
Preparing pipes for soldering
Fitting door handles, locks and latches
Flow and return pipes for radiators
First fix hot and cold water supply to bathroom
Making a gate as a project
Plumbing in hot water cylinder
Fitting shower pump to gravity fed system
Tiling corner of bathroom
Completed kitchen fitting course

 

If you would like to view reviews of YTA Training and Assessment then you can find them at reviews.co.uk

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

    Facebook